MILFORD, CT —
OSHA Inspection: BEAD INDUSTRIES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BEAD INDUSTRIES in 11 CASCADE BOULEVARD, MILFORD, CT 06460 (NAICS 332119). OSHA activity number 347450173.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BEAD INDUSTRIES
- Site address
- 11 CASCADE BOULEVARD
- City
- MILFORD
- State
- CT
- ZIP
- 06460
- Mailing
- 11 CASCADE BOULEVARD, MILFORD, CT 06460
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332119
- Employees
- 24
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Oct 16, 2024
- Abate by
- Dec 4, 2024
- Penalty
- Initial $3,687 · Current $1,844 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: WORKSHOP: On/or about May 1, 2024, the employer did not establish hazardous energy control lockout/tagout procedures for the employees on the machinery such as but not limited to the GF Mikron Mill S 500.
Recent events (2)
- — I (S) $1843.5
- — Z (S) $3687
1910.147 C07 I
- Issued
- Oct 16, 2024
- Abate by
- Dec 4, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: WORKSHOP: On/or about May 1, 2024, the employer did not provide hazardous energy control lockout/tagout training for the affected employees on the machinery such as but not limited to the GF Mikron Mill S 500.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Oct 16, 2024
- Penalty
- Initial $3,687 · Current $1,844 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: WORKSHOP/TOOL ROOM: On/or about May 1, 2024, the right rotating end nut and horizontal shaft of the Cincinnati buffer were unguarded. ABATED DURING THE INSPECTION
Recent events (2)
- — I (S) $1843.5
- — Z (S) $3687
1910.215 A02
- Issued
- Oct 16, 2024
- Penalty
- Initial $3,687 · Current $1,844 Reduced
General-duty citation text
29 CFR 1910.215(a)(2):Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: WORKSHOP/TOOL ROOM: On/or about May 1, 2024, the flange and spindle end of the DoAll surface grinder was unguarded. ABATED DURING THE INSPECTION.
Recent events (2)
- — I (S) $1843.5
- — Z (S) $3687
1910.219 B01
- Issued
- Oct 16, 2024
- Penalty
- Initial $4,610 · Current $2,305 Reduced
General-duty citation text
29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv)(a): WORKSHOP/ZONE 2: On/or about May 1, 2024, the employer did not sufficiently guard the flywheel at the #12 swaging machine. ABATED DURING THE INSPECTION.
Recent events (2)
- — I (S) $2305
- — Z (S) $4610
1904.32 A03
- Issued
- Oct 16, 2024
- Penalty
- Initial $922 · Current $461 Reduced
General-duty citation text
29 CFR 1904.32(a)(3):The employer did not certify an OSHA 300A Form or equivalent. ESTABLISHMENT: On or about May 1, 2024, the employer failed to certify the annual OSHA 300 A summary of work-related injuries and illnesses for the year 2023. ABATED DURING THE INSPECTION.
Recent events (2)
- — I (O) $461
- — Z (O) $922
1904.41 A01 I
- Issued
- Oct 16, 2024
- Penalty
- Initial $922 · Current $461 Reduced
General-duty citation text
29 CFR 1904.41(a)(1)(i):The establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and the establishment was classified in an industry listed in appendix A to subpart E of this part, and the employer did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee by the specified date: ESTABLISHMENT: On or about May 1, 2024, the employer having 24 establishment employees and operating under NAICS Code 332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive). had not electronically submitted their OSHA 300A Annual Summary data for calendar year 2023 which was required by March 2, 2024. ABATED DURING THE INSPECTION
Recent events (2)
- — I (O) $461
- — Z (O) $922
More inspections at Bead Industries
View Bead Industries's full OSHA safety record →
More inspections in this industry (NAICS 332119)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347450173.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.