FARMINGTON, NY —
OSHA Inspection: MODERN MANUFACTURING SERVICES, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MODERN MANUFACTURING SERVICES, LLC in 1111 CORPORATE DRIVE, FARMINGTON, NY 14425 (NAICS 333993). OSHA activity number 347469629.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MODERN MANUFACTURING SERVICES, LLC
- Site address
- 1111 CORPORATE DRIVE
- City
- FARMINGTON
- State
- NY
- ZIP
- 14425
- Mailing
- 1111 CORPORATE DRIVE, FARMINGTON, NY 14425
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333993
- Employees
- 33
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 19, 2024
- Penalty
- Initial $6,913 · Current $4,148 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) 1111 Corporate Drive, Farmington, NY 14425, on or about 5/9/2024; Employee are required to lockout/tagout bag and pouch making equipment during startup/troubleshooting/and run off tasks and the employer did not develop equipment specific energy controls procedures on the bag and pouch making equipment.
Recent events (2)
- — I (S) $4147.8
- — Z (S) $6913
1910.147 C06 I
- Issued
- Sep 19, 2024
- Abate by
- Nov 6, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) 1111 Corporate Drive, Farmington, NY 14425, on or about 5/9/2024; The employer did not conduct periodic inspections of the energy controls procedures on the bag and pouch making equipment. Abatement certification is required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Sep 19, 2024
- Penalty
- Initial $7,835 · Current $4,701 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Machine Shop, 1111 Corporate Drive, Farmington, NY 14425, on or about 5/9/2024: TRAK-TRM, Serial Number 95-640, Manual Mill was not provided with chuck and tool guard. b) Machine Shop, 1111 Corporate Drive, Farmington, NY 14425, on or about 5/9/2024: The COMET, Serial Number 1020, Manual Mill was not provided with chuck and tool guard. c) Machine Shop, 1111 Corporate Drive, Farmington, NY 14425, on or about 5/9/2024: The Bridgeport, Serial Number HJ323454, Manual Mill was not provided with chuck and tool guard.
Recent events (2)
- — I (S) $4701
- — Z (S) $7835
1910.132 D02
- Issued
- Sep 19, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a) 1111 Corporate Drive, Farmington, NY 14425, on or about 5/9/2024; The employer did not have a certified written workplace hazard assessment for personal protective equipment required in the facility.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C07 IV
- Issued
- Sep 19, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not keep the accomplished certified employee training to date: a) 1111 Corporate Drive, Farmington, NY 14425, on or about 5/9/2024; The employer did not certify that authorized employees were trained, to include each employee's name and dates of training.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 333993)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347469629.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.