BRIDGETON, NJ —
OSHA Inspection: MARTIN CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MARTIN CORPORATION in 171 N. PEARL ST., BRIDGETON, NJ 08302 (NAICS 313310). OSHA activity number 347479099.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Martin Corporation — free
Get an email when a new federal OSHA severe-injury report for Martin Corporation is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- MARTIN CORPORATION
- Site address
- 171 N. PEARL ST.
- City
- BRIDGETON
- State
- NJ
- ZIP
- 08302
- Mailing
- 171 N. PEARL ST., BRIDGETON, NJ 08302
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 313310
- Employees
- 13
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 26, 2024
- Abate by
- Jul 16, 2025
- Penalty
- Initial $6,452 · Current $6,452
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Production area: lockout tagout procedures were not developed, documented and utilized when authorized employees performed maintenance activities on the tenter machine, including cleaning of the machine and bulk removal of the clips, exposing employees to crushing hazards on or about December 29, 2023. NOTE: IN ADDITION TO CERTIFICATION THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
- — J (S) $6452
- — C (S) $6452
- — Z (S) $6452
1910.147 C05 I
- Issued
- Jun 26, 2024
- Abate by
- Jul 23, 2024
- Penalty
- Initial $6,452 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i):Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: (a) Production area, Tenter: On or about 12/29/2023, locks were not provided to authorized employees that performed activities including, but not limited to, cleaning the Tenter. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
- — J (S) $0
- — C (S) $6452
- — Z (S) $6452
1910.147 C07 I A
- Issued
- Jun 26, 2024
- Abate by
- Jul 23, 2024
- Penalty
- Initial $6,452 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation: a) Production area - Lockout training was not provided for authorized employees who performed tasks including, but not limited to removing the clips on the Tenter for cleaning and setting up the Tenter for production, on or about 12/29/23. NOTE: IN ADDITION TO CERTIFICATION THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
- — J (S) $0
- — C (S) $6452
- — Z (S) $6452
1910.147 F03 II D
- Issued
- Jun 26, 2024
- Abate by
- Jul 23, 2024
- Penalty
- Initial $6,452 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D):Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: (a) Production area, Tenter: On or about 12/29/2023, each employee involved in cleaning the Tenter, including removing clips and cleaning the rails, did not apply locks to the disconnect switch. NOTE: IN ADDITION TO CERTIFICATION THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
- — J (S) $0
- — C (S) $6452
- — Z (S) $6452
1910.212 A01
- Issued
- Jun 26, 2024
- Penalty
- Initial $2,765 · Current $2,765
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Production Area: A rotating wheel on the roller supplying fabric to the Tenter was not guarded exposing employees to rotating parts and caught in hazards, on or about 5/14/24. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
- — J (S) $2765
- — C (S) $2765
- — Z (S) $2765
1910.219 F03
- Issued
- Jun 26, 2024
- Penalty
- Initial $4,610 · Current $4,610
General-duty citation text
29 CFR 1910.219(f)(3):Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: a): Production area: A chain and sprocket that operated the wheel on the inspection machine was not guarded on or about 5/14/24.
Recent events (3)
- — J (S) $4610
- — C (S) $4610
- — Z (S) $4610
1910.178 L04 III
- Issued
- Jun 26, 2024
- Abate by
- Jul 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Production area: Employees operating a Komatsu propane powered forklift, Model FG25T-16, Serial Number A410520 were not evaluated at least once every three years, on or about 5/14/2024. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Martin Corporation
Nov 10, 2015
BRIDGETON, NJ
Jul 25, 2008
BRIDGETON, NJ
Sep 29, 2005
SAN MARCOS, CA
Feb 28, 1996
HILLSBORO, OR
View Martin Corporation's full OSHA safety record →
More inspections in this industry (NAICS 313310)
Jul 15, 2026
Acme Mills CO. LLC - Mechanic · HILLSDALE, MI
May 21, 2026
Tex-Tech Industries, INC. · NORTH MONMOUTH, ME
May 18, 2026
161217 - Dunn Manufacturing Corp. · MONROE, NC
May 11, 2026
161177 - Kings Plush, INC. · KINGS MOUNTAIN, NC
May 7, 2026
Polartec Tennessee Manufacturing, LLC · CLEVELAND, TN
More inspections in NJ
Jul 17, 2026
East Orange Community Charter School · EAST ORANGE, NJ
Jul 17, 2026
East Orange Community Charter School · EAST ORANGE, NJ
Jul 17, 2026
East Orange Community Charter School · EAST ORANGE, NJ
Jul 17, 2026
John Caruso Builders LLC · MOUNTAIN LAKES, NJ
Jul 16, 2026
Borough of Pennington Department of Public Works · PENNINGTON, NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347479099.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.