Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: INNOVIVE, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of INNOVIVE, LLC in 301 CENTENNIAL DRIVE #100, NORTH SIOUX CITY, SD 57049 (NAICS 339112). OSHA activity number 347493454.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Innovive, LLC — free Get an email when a new federal OSHA severe-injury report for Innovive, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
INNOVIVE, LLC
Site address
301 CENTENNIAL DRIVE #100
City
NORTH SIOUX CITY
State
SD
ZIP
57049
Mailing
301 CENTENNIAL DRIVE STE 100, NORTH SIOUX CITY, SD 57049
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
339112
Employees
93
Ownership type
A

2 citations on file for this inspection.

1910.212 A01

Deleted Serious Gravity 10 4 instances 14 exposed
Issued
Sep 19, 2024
Abate by
Oct 22, 2024
Penalty
Initial $14,518 · Current $0 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a)Innovive, LLC at 301 Centennial Drive #100, North Sioux City, SD 57049:  On or about and at times prior to May 15, 2024, the employer did not ensure the front of the conveyor system at the Line 1 denester was guarded.  This condition exposed employees to caught-in and amputation hazards associated with the unguarded end of the conveyor.  (b)Innovive, LLC at 301 Centennial Drive #100, North Sioux City, SD 57049:  On or about and at times prior to May 15, 2024, the employer did not ensure the front of the conveyor system on the Line 2 denester was  guarded.  This condition exposed employees to caught-in and amputation hazards associated with the unguarded end of the conveyor.  (c)Innovive, LLC at 301 Centennial Drive #100, North Sioux City, SD 57049:  On or about and at times prior to May 15, 2024, the employer did not ensure that an adequate guarding system was in place on the Line 2 denester.  This condition exposed employees to caught-in and amputation hazards associated with the unguarded machinery.  (d)Innovive, LLC at 301 Centennial Drive #100, North Sioux City, SD 57049:  On or about and at times prior to May 15, 2024, the employer did not ensure the Line 1 denester was adequately guarded on the right side of the interlocked door area.  This condition exposed employees to caught-in and amputation hazards associated with inadequate guarding.
Recent events (3)
  • — F (S) $0
  • — C (S) $14518
  • — Z (S) $14518

1910.219 H01

Other-than-serious Gravity 10 2 instances 14 exposed
Issued
Sep 19, 2024
Abate by
Oct 22, 2024
Penalty
Initial $0 · Current $7,269
29 CFR 1910.219(h)(1): Projecting keys, setscrews, or other projections in revolving parts were not removed, made flush, or guarded by metal covers:  (a)Innovive, LLC at 301 Centennial Drive #100, North Sioux City, SD 57049:  On or about and at times prior to May 15, 2024, the employer did not ensure the spinning shaft with projecting set screws on the Line 1 Denester conveyor belt system were properly guarded.  This condition exposed employees to caught-in hazards associated with the unguarded set screws.  (b)Innovive, LLC at 301 Centennial Drive #100, North Sioux City, SD 57049:  On or about and at times prior to May 15, 2024, the employer did not ensure the spinning  shaft with four projecting set screws on the Line 2 Denester conveyor belt system were properly guarded.  This condition exposed employees to caught-in hazards associated with the unguarded set screws.
Recent events (3)
  • — F (O) $7269
  • — C (S) $0
  • — Z (S) $0

View Innovive, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347493454.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.