HAYWARD, WI —
OSHA Inspection: TRUSSWORKS, INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TRUSSWORKS, INC in 11054 NORTH OLSON RD, HAYWARD, WI 54843 (NAICS 321214). OSHA activity number 347497125.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRUSSWORKS, INC
- Site address
- 11054 NORTH OLSON RD
- City
- HAYWARD
- State
- WI
- ZIP
- 54843
- Mailing
- 11054 NORTH OLSON RD, HAYWARD, WI 54843
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321214
- Employees
- 65
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 D03
- Issued
- Aug 16, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $5,485 · Current $3,291 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) Assembly department, inside rollers; On or about May 21, 2024, and dates prior, employees entered the perimeter of open rollers to perform servicing and/or maintenance tasks including jam clearing, cleaning, and lubricating, without the powered rollers being isolated from their energy source(s).
Recent events (2)
- — I (S) $3291
- — Z (S) $5485
1910.147 D04 I
- Issued
- Aug 16, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) Assembly department, inside rollers; On or about May 21, 2024, and dates prior, employees entered the perimeter of open rollers to perform servicing and/or maintenance tasks including jam clearing, cleaning, and lubricating, without affixing lockout or tagout devices to the energy isolation device(s) for the powered rollers.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 C04 I
- Issued
- Aug 16, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $4,113 · Current $2,468 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and/or projected more than one half the diameter of the shaft: (a) Outside stacker rollers; On or about May 21, 2024, and dates prior, employees who performed truss stacking/sorting duties worked near several powered rollers where the shaft ends projected more than one-half of the diameter of the shafts.
Recent events (2)
- — I (S) $2467.8
- — Z (S) $4113
1910.219 D01
- Issued
- Aug 16, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Outside stacker rollers; On or about May 21, 2024, and dates prior, employees who performed truss stacking/sorting duties worked in the vicinity of a powered roller belt drive motor in which the top pulley was not guarded, exposing an ingoing nip point.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 E03 I
- Issued
- Aug 16, 2024
- Abate by
- Sep 16, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): (a) Outside stacker rollers; On or about May 21, 2024, and dates prior, employees who performed truss stacking/sorting duties worked in the vicinity of a powered roller belt drive motor in which the belt was not guarded above the bottom pulley.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Trussworks, INC
View Trussworks, INC's full OSHA safety record →
More inspections in this industry (NAICS 321214)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347497125.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.