BUCHANAN, NY —
OSHA Inspection: 125 MAIN STREET REALTY CORP.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of 125 MAIN STREET REALTY CORP. in 12 WHITER ST. SUITE C, BUCHANAN, NY 10511 (NAICS 337122). OSHA activity number 347497497.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- 125 MAIN STREET REALTY CORP.
- Site address
- 12 WHITER ST. SUITE C
- City
- BUCHANAN
- State
- NY
- ZIP
- 10511
- Mailing
- 1360 ALBANY POST RD., CROTON ON HUDSON, NY 10520
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337122
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.213 C01
- Issued
- Jul 24, 2024
- Abate by
- Aug 12, 2024
- Penalty
- Initial $4,839 · Current $4,839
General-duty citation text
29 CFR 1910.213(c)(1):Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: location: Suite D on or about: 5/13/24 a) An employee was operating a Delta table saw to rip wood while manufacturing furniture. The blade of the saw was not guarded. Note: In addition to abatement certification, the employer is required to provide abatement documentation for this item in accordance with 29 CFR 1903.19
Recent events (1)
- — Z (S) $4839
1910.213 C02
- Issued
- Jul 24, 2024
- Abate by
- Aug 12, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: location: Suite D on or about: 5/13/24 a) An employee was operating a Delta table saw to rip wood while manufacturing furniture. The saw was not furnished with a spreader. Note: In addition to abatement certification, the employer is required to provide abatement documentation for this item in accordance with 29 CFR 1903.19
Recent events (1)
- — Z (S) $0
1910.213 C03
- Issued
- Jul 24, 2024
- Abate by
- Aug 12, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: location: Suite D on or about: 5/13/24 a) An employee was operating a Delta table saw to rip wood while manufacturing furniture. The saw did not have non kickback fingers or dogs. Note: In addition to abatement certification, the employer is required to provide abatement documentation for this item in accordance with 29 CFR 1903.19
Recent events (1)
- — Z (S) $0
1910.213 D01
- Issued
- Jul 24, 2024
- Abate by
- Aug 12, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: location: Suite D on or about: 5/13/24 a) An employee was operating a Delta table saw to rip wood while manufacturing furniture. The blade of the saw was not guarded. Note: In addition to abatement certification, the employer is required to provide abatement documentation for this item in accordance with 29 CFR 1903.19
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 337122)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347497497.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.