Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GERARDO CARPENTRY INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GERARDO CARPENTRY INC. in 11506 TORINO WAY, FRANKFORT, IL 60423 (NAICS 238130). OSHA activity number 347510935.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Gerardo Carpentry INC. — free Get an email when a new federal OSHA severe-injury report for Gerardo Carpentry INC. is published. One employer, no account, unsubscribe in one click.
Site address
11506 TORINO WAY
City
FRANKFORT
State
IL
ZIP
60423
Mailing
5211 S. HARDING AVE., CHICAGO, IL 60632
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 2 instances 2 exposed
Issued
May 30, 2024
Penalty
Initial $3,457 · Current $3,457
29 CFR  1926.102(a)(1):The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  a.  On or about April 30, 2024, at the above addressed jobsite, an employee using a pneumatic nail gun was not wearing safety glasses, thereby exposing the employee to hazards associated with eye injuries.  b.  On or about April 30, 2024, at the above addressed jobsite, employees using a handheld powered skilsaw were not wearing safety glasses, thereby exposing the employees to hazards associated with eye injuries.
Recent events (1)
  • — Z (S) $3457

1926.501 B13

Serious Gravity 10 3 instances 3 exposed
Issued
May 30, 2024
Penalty
Initial $4,839 · Current $4,839
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):  a.  On or about April 30, 2024, at the above addressed jobsite, an employee performing residential carpentry operations, twenty-one (21) feet four (4) inches above ground, was not protected from falls, thereby exposing the employee to fall hazards.  b.  On or about April 30, 2024, at the above addressed jobsite, an employee performing residential carpentry operations, twenty-one (21) feet two (2) inches above ground, was not protected from falls, thereby exposing the employee to fall hazards.  c.  On or about April 30, 2024, at the above addressed jobsite, an employee performing residential carpentry operations, eight (8) feet two (2) inches above ground, was not protected from falls, thereby exposing the employee to fall hazards.
Recent events (1)
  • — Z (S) $4839

1926.1053 B04

Serious Gravity 5 1 instance 3 exposed
Issued
May 30, 2024
Penalty
Initial $4,148 · Current $4,148
29 CFR  1926.1053(b)(4):Ladder(s) were used for purposes other than the purpose for which they were designed:  a.  On or about April 30, 2024, at the above addressed jobsite, the ladder used to access and egress the upper working level of the structure was a six-foot A-Frame ladder that was closed and leaned against structure, thereby exposing employees to fall hazards.
Recent events (1)
  • — Z (S) $4148

1926.503 B01

Other-than-serious 1 instance 3 exposed
Issued
May 30, 2024
Abate by
Jun 26, 2024
Penalty
Initial $0 · Current $0
29 CFR  1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer.  a.  On or about April 30, 2024, at the above addressed jobsite, employees performing residential carpentry operations had been provided fall protection training; however, the employer failed to verify the training by preparing a written certification of training record.
Recent events (1)
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347510935.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.