HUNTINGDON VALLEY, PA —
OSHA Inspection: G. ADASAVAGE LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of G. ADASAVAGE LLC. in 110 PIKE CIRCLE, HUNTINGDON VALLEY, PA 19006 (NAICS 333514). OSHA activity number 347513566.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- G. ADASAVAGE LLC.
- Site address
- 110 PIKE CIRCLE
- City
- HUNTINGDON VALLEY
- State
- PA
- ZIP
- 19006
- Mailing
- 110 PIKE CIRCLE, HUNTINGDON VALLEY, PA 19006
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333514
- Employees
- 22
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II
- Issued
- Sep 30, 2024
- Abate by
- Oct 18, 2024
- Penalty
- Initial $4,610 · Current $2,767 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items of this section: a) 110 Pike Circle Huntingdon Valley, PA - Machine Shop - On or about May 30, 2024, the employer's energy control procedure did not include procedural steps for the control of hazardous energy on the Minster E2 Press during maintenance and servicing. b) 110 Pike Circle Huntingdon Valley, PA - Machine Shop - On or about May 30, 2024, the employer's energy control procedure did not include procedural steps for the control of hazardous energy on the Mazak V-20 during maintenance and servicing. c) 110 Pike Circle Huntingdon Valley, PA - Machine Shop - On or about May 30, 2024, the employer's energy control procedure did not include procedural steps for the control of hazardous energy on the Johnson Press #10 during maintenance and servicing. d) 110 Pike Circle Huntingdon Valley, PA - Machine Shop - On or about May 30, 2024, the employer's energy control procedure did not include procedural steps for the control of hazardous energy on the Verson Allsteel Press during maintenance and servicing.
Recent events (2)
- — I (S) $2767
- — Z (S) $4610
1910.147 C06 I
- Issued
- Sep 30, 2024
- Abate by
- Oct 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) 110 Pike Circle Huntingdon Valley, PA - On or about May 30, 2024, and time prior to, the employer failed to conduct periodic inspections of energy control procedures at least annually.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Sep 30, 2024
- Abate by
- Oct 18, 2024
- Penalty
- Initial $4,610 · Current $2,766 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) 110 Pike Circle Huntingdon Valley, PA - On or about May 30, 2024, machine guarding was not provided on the flywheel of the Sesco Coil machine to protect employees from amputation hazards. b) 110 Pike Circle Huntingdon Valley, PA - On or about May 30, 2024, machine guarding was not provided on the flywheel of the Chicago Riveting Machine to protect employees from amputation hazards.
Recent events (2)
- — I (S) $2766
- — Z (S) $4610
1910.217 B04 I
- Issued
- Sep 30, 2024
- Abate by
- Oct 18, 2024
- Penalty
- Initial $4,610 · Current $2,767 Reduced
General-duty citation text
29 CFR 1910.217(b)(4)(i): Pedal mechanism(s) on mechanical power press(es) full revolution clutches were not protected to prevent unintended operation from falling or moving objects or by accidental stepping onto the pedals: a) 110 Pike Circle Huntingdon Valley, PA - Machine Shop - On or about May 30, 2024, the Verson Brake Press did not have protection on the foot pedal to prevent unintended activation.
Recent events (2)
- — I (S) $2767
- — Z (S) $4610
1910.253 B02
- Issued
- Sep 30, 2024
- Abate by
- Oct 18, 2024
- Penalty
- Initial $3,687 · Current $0 Reduced
General-duty citation text
29 CFR 1910.253(b)(2): Cylinder was not chained to give it stability and prevent it from being knocked over or damaged by passing persons or day to day operations: 110 Pike Circle Huntingdon Valley, PA - On or about May 30, 2024, gas cylinders were not secured to prevent accidental contact and damage by passing employees. Failure to secure cylinders can result in uncontrolled projectiles and release of gases.
Recent events (2)
- — I (O) $0
- — Z (S) $3687
More inspections in this industry (NAICS 333514)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347513566.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.