DALLAS, TX —
OSHA Inspection: STONEMODE GRANITE, LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of STONEMODE GRANITE, LLC in 2840 REWARD LANE, DALLAS, TX 75220 (NAICS 327991). OSHA activity number 347527806.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STONEMODE GRANITE, LLC
- Site address
- 2840 REWARD LANE
- City
- DALLAS
- State
- TX
- ZIP
- 75220
- Mailing
- 2840 REWARD LANE, DALLAS, TX 75220
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 17
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.95 C01
- Issued
- Dec 3, 2024
- Abate by
- Feb 7, 2025
- Penalty
- Initial $5,071 · Current $2,250 Reduced
8111
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (o) whenever employee noise exposures equaled or exceeded an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent: (a) In the fabrication area, a fabricator was exposed to noise levels at 110.1% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 110.1% is approximately 90.7 dBA. Sampling was performed for 619 minutes during one shift on July 10, 2024. (b) In the fabrication area, a fabricator was exposed to noise levels at 171.9% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 171.9% is approximately 93.9 dBA. Sampling was performed for 648 minutes during one shift on July 10, 2024. (c) In the fabrication area, a fabricator was exposed to noise levels at 269.8% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 269.8% is approximately 97.1 dBA. Sampling was performed for 644 minutes during one shift on July 10, 2024. (d) In the fabrication area, a fabricator was exposed to noise levels at 81.59% of the permissible 8-hour TWA (90 dBA). The equivalent dBA level of 81.59% is approximately 88.5 dBA. Sampling was performed for 208 minutes during one shift on July 10, 2024. Zero exposure was assumed for the time not sampled.
Recent events (2)
- — I (S) $2250
- — Z (S) $5071
1910.1053 D01
- Issued
- Dec 3, 2024
- Abate by
- Feb 7, 2025
- Penalty
- Initial $5,071 · Current $2,250 Reduced
9000
General-duty citation text
29 CFR 1910.1053(d)(1): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section: (a) In the fabrication area, the employer did not assess the exposure of each employee who was or could have been reasonably expected to be exposed to respirable crystalline silica at or above the action level during stone countertop fabrication.
Recent events (2)
- — I (S) $2250
- — Z (S) $5071
1910.1053 F02 I
- Issued
- Dec 3, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.1053(f)(2)(i): The employer did not establish and implement a written exposure control plan: (a) The employer did not establish an exposure control plan that contained at least the following elements: a description of the tasks in the workplace that involve exposure to respirable crystalline silica; a description of the engineering controls, work practices, and respiratory protection used to limit employee exposure to respirable crystalline silica for each task; and description of the housekeeping measures used to limit employee exposure to respirable crystalline silica.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1053 I01 I
- Issued
- Dec 3, 2024
- Abate by
- Feb 7, 2025
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.1053(i)(1)(i): The employer shall make medical surveillance available at no cost to the employee, and at a reasonable time and place, for each employee who will be occupationally exposed to respirable crystalline silica at or above the action level for 30 or more days per year: (a) In the fabrication area, employees fabricating stone countertops were exposed to respirable crystalline silica above the action level of 25 ug/m3, as an 8-hour time-weighted average, and the employer did not make medical surveillance available.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Stonemode Granite, LLC
View Stonemode Granite, LLC's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347527806.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.