SYOSSET, NY —
OSHA Inspection: CONTI AUTO BODY CORPORATION
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CONTI AUTO BODY CORPORATION in 44 HASKET DRIVE, SYOSSET, NY 11791 (NAICS 811121). OSHA activity number 347530578.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONTI AUTO BODY CORPORATION
- Site address
- 44 HASKET DRIVE
- City
- SYOSSET
- State
- NY
- ZIP
- 11791
- Mailing
- 44 HASKET DRIVE, SYOSSET, NY 11791
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C
- Issued
- Nov 29, 2024
- Abate by
- Dec 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c):The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: a) At the workplace, Conti Auto Body employees utilize 1/2 face negative pressure respirator in spray booth. The company did not develop and implement a respiratory protection program for employees wearing negative pressure respirators. On or about 6/6/2024 Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (O) $0
1910.134 E01
- Issued
- Nov 29, 2024
- Abate by
- Dec 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) At the workplace Conti Auto Body did not provide medical evaluations for employees required to wear 1/2 face negative pressure respirators. On or about 6/6/2024 Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (O) $0
1910.134 F01
- Issued
- Nov 29, 2024
- Abate by
- Dec 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employees using a tight-fitting facepiece respirator pass an appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT) as stated in this paragraph. a) At the workplace, Conti Auto Body did not fit test employees wearing negative pressure respirators. On or about 6/6/2024 Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (O) $0
1910.134 K03
- Issued
- Nov 29, 2024
- Abate by
- Dec 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: a) At the workplace, Conti Auto Body did not train employees wearing negative pressure respirators. On or about 6/6/2024 Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (O) $0
1910.1200 E01
- Issued
- Nov 29, 2024
- Abate by
- Dec 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: At the workplace, Conti Auto Body employees handle and are exposed to chemicals such as acetone, xylene. A written hazard communication program was not developed or implemented. On or about 6/6/24. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (O) $0
1910.1200 H01
- Issued
- Nov 29, 2024
- Abate by
- Dec 18, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: At the Conti Auto Body workplace, employees handle and are exposed to chemicals such paints, solvents and compressed gases. Employees did receive training concerning the hazards of the chemicals in their workplace. On or about 6/6/24. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 811121)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347530578.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.