HOUSTON, TX —
OSHA Inspection: CONTINENTAL COATINGS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CONTINENTAL COATINGS, INC. in 22331 NW LAKE DRIVE, HOUSTON, TX 77095 (NAICS 325510). OSHA activity number 347551244.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Continental Coatings, INC. — free
Get an email when a new federal OSHA severe-injury report for Continental Coatings, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- CONTINENTAL COATINGS, INC.
- Site address
- 22331 NW LAKE DRIVE
- City
- HOUSTON
- State
- TX
- ZIP
- 77095
- Mailing
- 22331 NW LAKE DRIVE, HOUSTON, TX 77095
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325510
- Employees
- 10
- Ownership type
- A
Citations
11 citations on file for this inspection.
1910.132 D02
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $11,292 · Current $3,500 Reduced
General-duty citation text
1910.132(d)(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment. On or about June 12, 2024, at Continental Coatings in Houston, TX the employer did not the employer did not provide a written certification of the hazard assessment.
Recent events (3)
- — F (O) $3500
- — C (S) $11292
- — Z (S) $11292
1910.134 C01
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $6,453 · Current $6,453
General-duty citation text
29 CFR 1910.134 (c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: On or about June 12, 2024, at Continental Coatings in Houston, TX, employees were allowed to wear 3M KN9041 respirators while blending and adding high solids polyurethane (hi-sol) without developing a respirator program, fit test and without being provided respiratory training. Employees were allowed to wear 3M KN9041 respirators when using high solid polyurethane (hi-sol) without being medically evaluated, without being fit tested and without being provided respiratory training.
Recent events (3)
- — F (S) $6453
- — C (S) $6453
- — Z (S) $6453
1910.134 E01
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $6,453 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was medically evaluated or required to use the respirator in the workplace: On or about June 12, 2024, at Continental Coatings in Houston, TX employees were required to wear 3M KN9041 particulate respirators when blending adding high solid polyurethane without being medically evaluated.
Recent events (3)
- — F (S) $0
- — C (S) $6453
- — Z (S) $6453
1910.134 F02
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $9,680 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(f)(2): The employer did not ensure that an employee using a tight-fitting respirator is fit tested prior to initial use, whenever a different respirator facepiece (size, style, make or model) is used, and at least annually thereafter. On or about June 12, 2024, at Continental Coatings in Houston, TX employees were required to wear 3M KN9041 particulate respirators when adding high solids polyurethane (hi-Sol) without a respirator fit test.
Recent events (3)
- — F (S) $0
- — C (S) $9680
- — Z (S) $9680
1910.134 K03
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $9,680 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: On or about June 12, 2024, at Continental Coatings, in Houston, TX, employees were required to wear 3M 9041 particulate respirators when adding high solid polyurethane without being provided respirator training.
Recent events (3)
- — F (S) $0
- — C (S) $9680
- — Z (S) $9680
1910.151 C
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $4,839 · Current $2,439 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: On or about June 12, 2024, at Continental Coatings in Houston, TX the employer did not provide appropriate emergency facilities for quick drenching or flushing of the eyes and body where employees may be exposed to formaldehyde an injurious corrosive material within the work area.
Recent events (3)
- — F (O) $2439
- — C (S) $4839
- — Z (S) $4839
1910.178 L02 II
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $9,680 · Current $6,500 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii):The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. On or about June 12, 2024, at Continental Coatings in Houston, TX does not conduct an evaluation of all operator's performance prior to permitting operation of powered industrial trucks.
Recent events (3)
- — F (O) $6500
- — C (S) $9680
- — Z (S) $9680
1910.178 L04 II E
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(ii)(E): Refresher training was not provided to powered industrial truck operators after a condition in the workplace changed that affected safe operation of the truck: On or about June 12, 2024, at Continental Coatings in Houston, TX powered industrial truck refresher training was not provided to operators when the workplace changed that affected safe operation of the truck.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7):Industrial trucks were not examined daily before being placed in service. On or about June 12, 2024, at Continental Coatings in Houston, TX employees were using forklifts that were put into service without first being examined to check unsafe conditions, that include but is not limited to the following equipment: a. Forklift Caterpillar, Type 85P-29, Serial# MSI031295; b. Toyota, Type 85P-19, Serial# MTI00070061
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.303 E01 II
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $4,839 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.303(e)(1)(ii):1910.303(e)(1)(ii): Electric equipment shall not be used unless markings have been placed on equipment such as voltage, current, wattage and other ratings as necessary: On or about June 12, 2024, in Continental Coatings in Houston, TX in the paint production area at electrical box panels did not have markings such as voltage, current, wattage and other ratings as necessary.
Recent events (3)
- — F (O) $1500
- — C (S) $4839
- — Z (S) $4839
1910.1200 E01
- Issued
- Oct 28, 2024
- Abate by
- Nov 15, 2024
- Penalty
- Initial $11,292 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): On or about, June 12, 2024, the employer did not develop and implemented a written hazard communication program that made employees aware of the hazardous chemicals or products in the facility.
Recent events (3)
- — F (S) $0
- — C (S) $11292
- — Z (S) $11292
More inspections at Continental Coatings, INC.
View Continental Coatings, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 325510)
Jul 14, 2026
Axalta Coating Systems, LLC · FRONT ROYAL, VA
Jul 8, 2026
Rupert Gibbon & Spider, INC. · HEALDSBURG, CA
Jun 24, 2026
Richard'S Paint Manufacturing CO · ROCKLEDGE, FL
Jun 18, 2026
The Sherwin-Williams Company · ROCHESTER, PA
Jun 15, 2026
Preserva Products LTD · AUBURN, CA
More inspections in TX
Jul 17, 2026
Cornelius Nurseries, INC. · RICHMOND, TX
Jul 17, 2026
Holloway Houston, INC. · HOUSTON, TX
Jul 17, 2026
Voluntary Purchasing Groups, INC. · BONHAM, TX
Jul 16, 2026
Rnwbl · SNYDER, TX
Jul 16, 2026
United Rentals, INC. · WICHITA FALLS, TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347551244.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.