Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MAIN STREET AMERICAN HOME MANUFACTURING, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MAIN STREET AMERICAN HOME MANUFACTURING, LLC in 4 CORPORATE PLACE, PISCATAWAY, NJ 08854 (NAICS 314120). OSHA activity number 347568685.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Main Street American Home Manufacturing, LLC — free Get an email when a new federal OSHA severe-injury report for Main Street American Home Manufacturing, LLC is published. One employer, no account, unsubscribe in one click.
Site address
4 CORPORATE PLACE
City
PISCATAWAY
State
NJ
ZIP
08854
Mailing
302 FIFTH AVE., 5TH FLOOR, NEW YORK, NY 10001
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
314120
Employees
120
Ownership type
A

4 citations on file for this inspection.

1910.22 A01

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Dec 6, 2024
Abate by
Jan 3, 2025
Penalty
Initial $8,296 · Current $8,296
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, and service rooms shall be kept clean and orderly and in a sanitary condition.  a.) Main Street American Home Manufacturing/4 Corporate place, Piscataway, NJ, 08854 - Near the Garnet #2 machine area: The employer did not maintain the warehouse floor in a clean condition due to pillow fiber material being on the ground exposing employee to slip/trip hazards.   Condition observed on or about 06/21/2024.
Recent events (2)
  • — I (O) $8296
  • — Z (S) $8296

1910.147 C06 I

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 6, 2024
Abate by
Jan 3, 2025
Penalty
Initial $12,445 · Current $8,712 Reduced
29 CFR  1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  A.) Main Street American Home Manufacturing LLC/4 Corporate Place, Piscataway, NJ, 08854/The employer did not conduct periodic inspections of each energy control procedure at least annually to verify that the specific procedures for equipment, such as the Garnet #2 machine, were adequate and were being applied correctly.  Condition noted on or about 06/12/2024.
Recent events (2)
  • — I (S) $8711.5
  • — Z (S) $12445

1910.147 C07 I

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 6, 2024
Abate by
Jan 3, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:  a.)Main Street American Home Manufacturing LLC, 4 Corporate place, Piscataway, NJ, 08854 -  The employer did not train employees to ensure that the purpose and functions of the energy control program were understood, while cleaning debris off the floor in the area of the Garnet #2 machine.  Condition noted on or about  6/12/2024
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 6, 2024
Abate by
Jan 3, 2025
Penalty
Initial $12,445 · Current $8,712 Reduced
29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a.)Main Street American Home Manufacturing LLC/4 Corporate Place, Piscataway, NJ, 08854/The employer did not provide guarding for the garnet #2 machine which allowed employees to enter the machine area while in operation exposing them to broken bones and amputations.   Condition noted on or about 06/12/2024
Recent events (2)
  • — I (S) $8711.5
  • — Z (S) $12445

View Main Street American Home Manufacturing, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347568685.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.