Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SOUTHERN HERITAGE CONSTRUCTION, INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SOUTHERN HERITAGE CONSTRUCTION, INC in 1704 N. AURORA ROAD, NAPERVILLE, IL 60563 (NAICS 238120). OSHA activity number 347580219.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Southern Heritage Construction, INC — free Get an email when a new federal OSHA severe-injury report for Southern Heritage Construction, INC is published. One employer, no account, unsubscribe in one click.
Site address
1704 N. AURORA ROAD
City
NAPERVILLE
State
IL
ZIP
60563
Mailing
368 OLD DALTON ROAD, NE, CALHOUN, GA 30701
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238120
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.760 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Sep 26, 2024
Penalty
Initial $6,452 · Current $3,900 Reduced
29 CFR  1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems.   On or about June 26, 2024, Employees were exposed to fall hazards in approximately 18 feet while engaged in steel roofing activities. Fall protection was not being utilized while employees were engaged in metal  roof installation and activities.  No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $6452

1926.761 B

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 26, 2024
Abate by
Nov 15, 2024
Penalty
Initial $4,610 · Current $2,700 Reduced
29 CFR  1926.761(b): The employer shall train each employee exposed to a fall hazard in accordance with the requirements of 29 CFR 1926.761. The employer shall institute a training program and ensure employee participation in the program. The program shall include training and instruction in the following areas: (1) The recognition and identification of fall hazards in the work area; (2) The use and operation of guardrail systems (including perimeter safety cable systems), personal fall arrest systems, positioning device systems, fall restraint systems, safety net systems, and other protection to be used; (3) The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used; (4) The procedures to be followed to prevent falls to lower levels and through or into holes and openings in walking/working surfaces and walls; and (5) The fall protection requirements of this subpart.   On or about June 26, 2024, the employer did not certify that employees had been trained to recognize and minimize fall hazards. Employees were exposed to fall hazards in approximately 18  feet while performing metal roofing activities without using fall protection.   Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $2700
  • — Z (S) $4610

1926.453 B02 V

Repeat Gravity 5 1 instance 3 exposed
Issued
Sep 26, 2024
Penalty
Initial $9,219 · Current $5,400 Reduced
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:Note:  As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system.  The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated 1926.502(e).   On or about June 26, 2024, employees were performing metal roofing operations on roof of  a commercial property using a SkyJack SJ45T aerial lift and were exposed to fall hazards approximately 18 feet when the employer failed to ensure that fall protection was utilized.  No abatement certification or documentation is required for this item.  Southern Heritage Construction, Inc was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.453(b)(2)(v), which was contained in OSHA inspection number 1429520, citation number 2 item number 1 and was affirmed as a final order on October 23, 2019, with respect to a workplace located at Eljadid St., Morgantown, WV, 26505.
Recent events (2)
  • — I (R) $5400
  • — Z (R) $9219

View Southern Heritage Construction, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347580219.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.