Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: NEWGEN FRAMING, LLC

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of NEWGEN FRAMING, LLC in 3500 SOUTH LINEDRIVE AVENUE, SIOUX FALLS, SD 57110 (NAICS 238130). OSHA activity number 347581738.

Watch Newgen Framing, LLC — free Get an email when a new federal OSHA severe-injury report for Newgen Framing, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
NEWGEN FRAMING, LLC
Site address
3500 SOUTH LINEDRIVE AVENUE
City
SIOUX FALLS
State
SD
ZIP
57110
Mailing
3909 SOUTH GRAND SLAM PLACE UNIT #5, SIOUX FALLS, SD 57110
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
14
Ownership type
A

6 citations on file for this inspection.

1926.20 B02

Other-than-serious Gravity 1 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1750.00 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain a safety program which provides for frequent and regular inspections of jobsites, materials, and equipment to be made by a competent person who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has the authority to take prompt corrective measures to eliminate them:  (a)NewGen Framing, LLC at 3500 South Linedrive Avenue, Sioux Falls, SD 57110: On or about and at times prior to June 26, 2024, the exposing employer did not ensure an accident prevention program was developed and implemented for the work environment to include regular inspections of the jobsite, materials, and equipment; conducted by a competent person. Employees were conducting framing operations on a multi-family residential property without the use of a fall protection system, improper use of a fall protection system, a lack of use of eye protection while using pneumatic nail guns, using incorrectly installed extension ladders, and a lack of training documentation.  This condition exposed employees to a variety of hazards while working on site.
Recent events (2)
  • — I (O) $1750
  • — Z (S) $2765

1926.102 A01

Other-than-serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2765.00 · Current $1750.00 Reduced
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles:  (a)NewGen Framing, LLC at 3500 South Linedrive Avenue, Sioux Falls, SD 57110: On or about and at times prior to June 26, 2024, the exposing employer did not ensure that each employee that was installing roof truss systems on a multi-family residential property with the use of a pneumatic nail guns were protected from flying particles by the use of appropriate eye protection.  This condition exposed employees to struck-by hazards.
Recent events (2)
  • — I (O) $1750
  • — Z (S) $2765

1926.501 B13

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $6452.00 · Current $4000.00 Reduced
29 CFR 1926.501(b)(13): Employees engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employees provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):   (a)NewGen Framing, LLC at 3500 South Linedrive Avenue, Sioux Falls, SD 57110: On or about and at times prior to June 26, 2024, the exposing employer did not ensure that employees were protected from falls while conducting framing and roof truss system installation operations on a multi-family residential structure. This condition exposed the employees to fall hazards greater than six feet.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6452

1926.502 D16 III

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.502(d)(16)(iii): Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level:  (a)NewGen Framing, LLC at 3500 South Linedrive Avenue, Sioux Falls, SD 57110: On or about and at times prior to June 26, 2024, the exposing employer did not ensure that employees were protected from falls while conducting framing and roof truss system installation operations on a multi-family residential structure in that personal fall arrest systems were not rigged properly. This condition exposed the employees to fall hazards greater than six feet and contact with a lower level.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 B01

Other-than-serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:  (a)NewGen Framing, LLC at 3500 South Linedrive Avenue, Sioux Falls, SD 57110: On or about and at times prior to June 26, 2024, the employer did not ensure a written training certification on the use of fall protection systems prior to employees being exposed to fall hazards while working on a multi-family residential property. This condition exposed employees to fall hazards greater than six feet.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4610.00 · Current $2500.00 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladders' side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  (a)NewGen Framing, LLC at 3500 South Linedrive Avenue, Sioux Falls, SD 57110: On or about and at times prior to June 26, 2024, the exposing employer did not ensure that the 300-pound Louisville Fiberglass 20-foot extension ladder, Model #: 5120 that the employees were using was extended at least three feet above the upper landing surface of the third level floor of a multi-family residential building.  This condition exposed employees to fall hazards.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $4610

AEROTEK

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347581738.