EVANSVILLE, WI —
OSHA Inspection: BAKER MANUFACTURING COMPANY, LLC
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of BAKER MANUFACTURING COMPANY, LLC in 133 ENTERPRISE STREET, EVANSVILLE, WI 53536 (NAICS 331513). OSHA activity number 347582660.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BAKER MANUFACTURING COMPANY, LLC
- Site address
- 133 ENTERPRISE STREET
- City
- EVANSVILLE
- State
- WI
- ZIP
- 53536
- Mailing
- 133 ENTERPRISE STREET, EVANSVILLE, WI 53536
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331513
- Employees
- 150
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 12, 2024
- Penalty
- Initial $5,817 · Current $5,817
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about June 27, 2024, the employer did not ensure that the Cleereman Drill Press was equipped with one or more methods of machine guarding to protect the operator from flying chips and sparks. b) On or about June 27, 2024, the employer did not ensure that the Wilter Strand Drill Press was equipped with one or more methods of machine guarding to protect the operator from flying chips and sparks. c) On or about June 27, 2024, the employer did not ensure that the Shop Press (a.k.a. "shaft and pinion press") was equipped with one or more methods of machine guarding to protect the operator from struck by hazards due to ejected workpieces or flying debris during operation.
Recent events (2)
- — I (O) $5817
- — Z (S) $5817
1910.212 A03 II
- Issued
- Dec 12, 2024
- Abate by
- Jan 6, 2025
- Penalty
- Initial $7,757 · Current $5,430 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about June 27, 2024, the employer did not ensure that the point of operation on the Bostitch Box Bottomer, Model FC95, was guarded to prevent employee(s) from having any part of their body in the danger zone during the operation cycle.
Recent events (2)
- — I (S) $5430
- — Z (S) $7757
1910.215 A01
- Issued
- Dec 12, 2024
- Penalty
- Initial $7,757 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(1): Abrasive wheel(s) used on grinding machinery were not used with safety guard: On or about June 27, 2024, and at times prior to, the employer failed to ensure that the pedestal grinder next to the Robotic Grinding cell was equipped with a tongue guard.
Recent events (2)
- — I (S) $0
- — Z (S) $7757
1910.146 C02
- Issued
- Dec 12, 2024
- Abate by
- Feb 28, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(c)(2): The employer did not inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces: On or about June 27, 2024, the employer did not inform exposed employees, by posting danger signs or by any other equally effective means, of the existence and location of and the danger posed by the permit spaces including for entering the back side of the Mazak 6800 HCN Horizontal Machining Center.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.146 C07 III
- Issued
- Dec 12, 2024
- Abate by
- Feb 28, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(c)(7)(iii): The employer did not document the basis for determining that all hazards in a permit space had been eliminated, through a written certification that contained the date, the location of the space, and the signature of the person making the determination. The certification was not made available to each employee entering the space or to that employee's authorized representative. On or about June 27, 2024, the employer did not document the basis for determining that all hazards in a permit space had been eliminated, through a written certification that contained the date, the location of the space, and the signature of the person making the determination including for entering the back side of the Mazak 6800 HCN Horizontal Machining Center.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Baker Manufacturing Company, LLC
View Baker Manufacturing Company, LLC's full OSHA safety record →
More inspections in this industry (NAICS 331513)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347582660.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.