OSHA Inspection: KENNETH G LILLY FASTENERS, LLC.

Issued

2024-12-19 00:00:00

Penalty

Initial $4839.00 · Current $3387.00 Reduced

General-duty citation text

29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition:  a) 855 Dawson Drive Newark, DE 19713: On or about July 28, 2024, the concrete floor of the warehouse had petroleum-based products spilled on the surface creating slip and fall hazards for the employes working in the area.

Issued

2024-12-19 00:00:00

Penalty

Initial $8067.00 · Current $5647.00 Reduced

General-duty citation text

29 CFR 1910.37(b)(1): Each exit route was not adequately lighted so that employees with normal vision could see along the exit route:  a) 855 Dawson Drive Newark, DE 19713: On or about July 28, 2024, exit routes were not adequately lighted in case of an emergency.

Issued

2024-12-19 00:00:00

Penalty

Initial $4839.00 · Current $3387.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  a) 855 Dawson Drive Newark, DE 19713: On or about July 28, 2024, employees operating powered industrial trucks were not trained at least once every three years exposing employees to equipment operators that are not qualified to operate the equipment.

Issued

2024-12-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(m)(5)(i): When a powered industrial truck is left unattended, load engaging means were not fully lowered, controls were not neutralized, power was not shut off, and brakes set:  a) 855 Dawson Drive Newark, DE 19713: On or about July 28, 2024, powered industrial trucks left unattended had their tines raised with products loaded onto them creating trip hazards as well as impalement hazards for the employees.

Issued

2024-12-19 00:00:00

Penalty

Initial $6453.00 · Current $4517.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) 855 Dawson Drive Newark, DE 19713: On or about July 28, 2024, employee(s) used unguarded belt sander to remove excess metal on specialized bolts exposing employees to caught-in/potential amputation or severe injury to the belt with speeds up to 8000 SFPM as well as the drive and guide pully.