Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CRICKSIDE TIMBER CRAFT

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CRICKSIDE TIMBER CRAFT in 4033 LINGLESTOWN ROAD, HARRISBURG, PA 17112 (NAICS 238160). OSHA activity number 347590960.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Crickside Timber Craft — free Get an email when a new federal OSHA severe-injury report for Crickside Timber Craft is published. One employer, no account, unsubscribe in one click.
Site address
4033 LINGLESTOWN ROAD
City
HARRISBURG
State
PA
ZIP
17112
Mailing
556 IRON BRIDGE ROAD, LOYSVILLE, PA 17047
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

3 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 1 1 instance 4 exposed
Issued
Jul 2, 2024
Abate by
Jul 22, 2024
Penalty
Initial $2,765 · Current $2,000 Reduced
29 CFR  1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l) (Construction Reference 1926.602):   (a) 4033 Linglestown Road, Harrisburg PA; building under construction in the same parking lot - On or about July 1, 2024, the foreman operated the JLG Telehandler #8042 without having been trained to do so in accordance with the requirements set forth in 1910.178(l).   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $2765

1926.501 B10

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 2, 2024
Abate by
Jul 22, 2024
Penalty
Initial $3,687 · Current $2,600 Reduced
29 CFR  1926.501(b)(10):Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest system, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system:  (a) 4033 Linglestown Road, Harrisburg PA; building under construction in the same parking lot - On or about July 1, 2024, employees engaged in roofing activities on a 4:12 slope roof, 11 feet 4 inches above grade where not protected from fall hazards.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $2600
  • — Z (S) $3687

1926.1053 B01

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 2, 2024
Abate by
Jul 22, 2024
Penalty
Initial $3,687 · Current $2,600 Reduced
29 CFR  1926.1053(b)(1):Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  (a) 4033 Linglestown Road, Harrisburg PA; building under construction in the same parking lot, side facing the parking lot - On or about July 1, 2024, the 14-foot aluminum ladder which was used by employees to access the 11 foot 4 inch high roof was not positioned to provide at least 3 feet of side rail above the roof edge which exposed employees to a fall hazard.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $2600
  • — Z (S) $3687

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347590960.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.