MUSKOGEE, OK —
OSHA Inspection: ACME ENGINEERING AND MANUFACTURING CORP.
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of ACME ENGINEERING AND MANUFACTURING CORP. in 1820 N. YORK STREET, MUSKOGEE, OK 74403 (NAICS 333413). OSHA activity number 347598948.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACME ENGINEERING AND MANUFACTURING CORP.
- Site address
- 1820 N. YORK STREET
- City
- MUSKOGEE
- State
- OK
- ZIP
- 74403
- Mailing
- P.O. BOX 978, MUSKOGEE, OK 74402
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333413
- Employees
- 300
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.132 A
- Issued
- Dec 9, 2024
- Abate by
- Dec 31, 2024
- Penalty
- Initial $12,676 · Current $10,141 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: a. On or about June 25, 2024, in the shipping area, an employee was not protected from struck-by hazards when operating a Toyota powered industrial truck without using the seatbelt. b. On or about June 25, 2024, in a production area, an employee was not protected from struck-by hazards when operating a Doosan powered industrial truck without using the seatbelt.
Recent events (2)
- — I (S) $10141
- — Z (S) $12676
1910.212 A01
- Issued
- Dec 9, 2024
- Abate by
- Dec 31, 2024
- Penalty
- Initial $25,353 · Current $10,141 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about June 25, 2024, in the Tube Cell Fabrication area, a form roller machine lacked adequate guarding to protect the operator from rotating rollers and in-going nip points. The ACME Engineering & Manufacturing Corp. was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 29 CFR 1910.212 (a)(1), which was contained in OSHA inspection number 1650517, citation number 1, item number 1a, and was affirmed as a final order on August 21, 2023, with respect to a workplace located at 1820 N. York St., Muskogee, OK 74403.
Recent events (2)
- — I (S) $10141
- — Z (R) $25353
1910.219 C02 I
- Issued
- Dec 9, 2024
- Abate by
- Dec 31, 2024
- Penalty
- Initial $25,353 · Current $10,141 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: On or about June 25, 2024, in the Tube Cell Fabrication area, a form roller machine had a rotating horizontal shaft that was less than 7 feet from the floor with no enclosure or trough to protect employees from contacting the rotating shaft. The ACME Engineering & Manufacturing Corp was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 29 CFR 1910.219 (c) (2) (i), which was contained in OSHA inspection number 1650517, citation number 1, item number 1b and was affirmed as a final order on August 21, 2023, with respect to a workplace located at 1820 N. York St., Muskogee, OK 74403.
Recent events (2)
- — I (S) $10141
- — Z (R) $25353
1904.29 B01
- Issued
- Dec 9, 2024
- Abate by
- Dec 31, 2024
- Penalty
- Initial $2,534 · Current $2,027 Reduced
General-duty citation text
29 CFR 1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent) was not completed in the detail as required by the regulation: On or about June 25, 2024, the year 2024 OSHA Form 300 Log of Work-Related Injuries and Illnesses was not kept in the detail required by the regulation for the following recordable work-related injuries: a. Case Number 24-12, injury date 6/18/24, column (F) did not describe the object or substance that directly injured or caused the employee to become injured, and did not adequately describe the injury. b. Case Number 24-13, injury date 6/18/24, column (F) did not adequately describe the body part affected, and column (H) was not marked as a days away case.
Recent events (2)
- — I (O) $2027
- — Z (O) $2534
More inspections at Acme Engineering and Manufacturing Corp.
View Acme Engineering and Manufacturing Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 333413)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347598948.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.