OSHA Inspection: LEGACY WOOD PRODUCTS, INC

Issued

2024-09-06 00:00:00

Abate by

2024-10-02 00:00:00

Penalty

Initial $2074.00 · Current $1037.00 Reduced

General-duty citation text

29 CFR  1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition:   (a) On or about 07/10/2024 - Mill Area, walking working surfaces throughout the work area were not free of hazards such as, but not limited to, air hoses and extension cords exposing employees to potential trip and fall hazards.

Issued

2024-09-06 00:00:00

Penalty

Initial $4148.00 · Current $2074.00 Reduced

General-duty citation text

1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:(a)(LOCATION)(IDENTIFY SPECIFIC OPERATIONS AND/OR CONDITIONS)(IDENTIFY MACHINERY OR EQUIPMENT)(THIS INCLUDES ENFORCEMENT OF PROCEDURES)  (a) On or about 07/10/2024 - Mill Area, procedures were not developed, documented, and utilized by employees performing servicing and/or maintenance activities on the Overhead Scragg, exposing employees to caught-in hazards.

Issued

2024-09-06 00:00:00

Penalty

Initial $4839.00 · Current $2420.00 Reduced

General-duty citation text

29 CFR  1910.213(a)(9): All belts, pulleys, gears, shafts, and moving parts were not guarded in accordance with the specific requires of 1910.219:  (a) On or about 07/10/2024 - Mill Area,  the belt and pulley for the Rees-Memphis saw dust collector was not guarded exposing employees to caught-in hazards.

Issued

2024-09-06 00:00:00

Penalty

Initial $4839.00 · Current $2420.00 Reduced

General-duty citation text

29 CFR  1910.213(a)(9): All belts, pulleys, gears, shafts, and moving parts were not guarded in accordance with the specific requires of 1910.219:  (a)  On or about 07/10/2024 - Mill Area, the belt and pulley on the Morbark woodchipper was not guarded exposing employees to caught-in hazards.

Issued

2024-09-06 00:00:00

Abate by

2024-10-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.25(b)(5)(i): The employer did not ensure that when a door or a gate opens directly on a stairway, a platform is provided, and the swing of the door or gate does not reduce the platform's effective usable depth to less than 20 inches (51 cm) for platforms installed before January 17, 2017:   (a) On or about 07/10/2024 - Mill Area, the stairs leading to the control area for the Scragg Mill did not have a platform exposing employees to a fall hazard.

Issued

2024-09-06 00:00:00

Abate by

2024-10-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.28(b)(11)(ii): (ii) Each flight of stairs having at least 3 treads and at least 4 risers is equipped with stair rail systems and handrails as follows: (see TABLE D-2)   (a) On or about 07/10/2024 - Mill Area, the stairs leading to the control area for the Scragg Mill were not equipped with handrails.