CHESHIRE, CT —
OSHA Inspection: VESSEL TECHNOLOGIES, INC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of VESSEL TECHNOLOGIES, INC in 10 REALTY DRIVE, CHESHIRE, CT 06410 (NAICS 531110). OSHA activity number 347616302.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VESSEL TECHNOLOGIES, INC
- Site address
- 10 REALTY DRIVE
- City
- CHESHIRE
- State
- CT
- ZIP
- 06410
- Mailing
- 46 WEST 55TH STREET, NEW YORK, NY 10019
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 531110
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 L01 II
- Issued
- Nov 14, 2024
- Penalty
- Initial $3,687 · Current $3,687
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck. 10 Realty Drive Cheshire CT: On or about July 9, 2024, the employer did not ensure an employee operating a JCB 510.56 F powered industrial truck was trained in it's safe operation prior to use.
Recent events (1)
- — Z (S) $3687
1926.501 B04 II
- Issued
- Nov 14, 2024
- Penalty
- Initial $2,765 · Current $2,765
General-duty citation text
29 CFR 1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes by covers. a) Building 1 First Floor - 10 Realty Drive Cheshire CT: On or about July 9, 2024, the employer exposed employees to tripping in or stepping into hazards with multiple floor openings not covered or protected by a guardrail. b) Building 2 First Floor - 10 Realty Drive Cheshire CT: On or about July 9, 2024, the employer exposed employees to tripping in or stepping into hazards with multiple floor openings not covered or protected by a guardrail.
Recent events (1)
- — Z (S) $2765
1926.1053 B01
- Issued
- Nov 14, 2024
- Abate by
- Dec 11, 2024
- Penalty
- Initial $4,610 · Current $4,610
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access. a) Building 1 - 10 Realty Drive Cheshire CT: On or about July 9, 2024, employees were exposed to a fall hazard of approximately 12 feet using a 16' Louisville fiberglass ladder not extending 3 feet above the step off point to access the working floor of the building. b) Building 2 - 10 Realty Drive Cheshire CT: On or about July 9, 2024, employees were exposed to a fall hazard of approximately 12 feet using a 16' Louisville fiberglass ladder not extending 3 feet above the step off point to access the working floor of the building.
Recent events (1)
- — Z (S) $4610
1926.1060 A
- Issued
- Nov 14, 2024
- Abate by
- Dec 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards. 10 Realty Drive Cheshire CT: On or about July 9, 2024, employees were exposed to fall hazards of approximately 12 feet due to the employer not providing a training program for each employee using ladders as necessary, which would enable each employee to recognize hazards related to ladder use to minimize such hazards.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 531110)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347616302.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.