RIPLEY, NY —
OSHA Inspection: RIPLEY MACHINE & TOOL COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RIPLEY MACHINE & TOOL COMPANY, INC. in 9825 EAST MAIN ROAD, RIPLEY, NY 14775 (NAICS 332710). OSHA activity number 347626798.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RIPLEY MACHINE & TOOL COMPANY, INC.
- Site address
- 9825 EAST MAIN ROAD
- City
- RIPLEY
- State
- NY
- ZIP
- 14775
- Mailing
- 9825 EAST MAIN ROAD, RIPLEY, NY 14775
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 14
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jul 29, 2024
- Abate by
- Sep 3, 2024
- Penalty
- Initial $3,134 · Current $2,351 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 07/18/2024, in the manufacturing area; Employees were exposed to amputation hazards when Lockout/Tagout (LOTO) procedures were not utilized for the control of hazardous energy when performing servicing and maintenance activities such as, but not limited to; changing blades and changing the coolant pump on the Clausing Kalamazoo bandsaw, model KC12AX. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $2350.5
- — Z (S) $3134
1910.147 C07 I A
- Issued
- Jul 29, 2024
- Abate by
- Sep 3, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Each authorized employee had not received training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: a) On or about 07/18/2024, throughout the establishment; the employer did not provide Lockout/Tagout(LOTO) training to authorized employees who performed servicing and maintenance activities on machines such as, but not limited to: the Clausing Kalamazoo bandsaw, model KC12AX. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jul 29, 2024
- Abate by
- Sep 3, 2024
- Penalty
- Initial $3,134 · Current $2,351 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 07/18/2024, in the manufacturing area; employees were exposed to rotating parts hazards when operating the Clausing-Colchester manual Lathe without guarding the spindle. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $2350.5
- — Z (S) $3134
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347626798.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.