MARFA, TX —
OSHA Inspection: VILLAGE FARMS, LP. / MARFA 1
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of VILLAGE FARMS, LP. / MARFA 1 in STATE HWY 17 NORTH, MARFA,TX 79843, MARFA, TX 79843 (NAICS 111419). OSHA activity number 347637662.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VILLAGE FARMS, LP. / MARFA 1
- Site address
- STATE HWY 17 NORTH, MARFA,TX 79843
- City
- MARFA
- State
- TX
- ZIP
- 79843
- Mailing
- 90 COLONIAL CENTER PARKWAY SUITE 100, LAKE MARY, FL 32746
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
- Migrant workforce
- X
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 111419
- Employees
- 409
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C07 I
- Issued
- Sep 18, 2024
- Abate by
- Oct 29, 2024
- Penalty
- Initial $6,913 · Current $4,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: On or about July 23, 2024, on the southside of the Pack House, employees utilized MPS Box Maker Machine without adequate training while performing box moulding operations.
Recent events (2)
- — I (S) $4750
- — Z (S) $6913
1910.212 A03 II
- Issued
- Sep 18, 2024
- Abate by
- Oct 29, 2024
- Penalty
- Initial $16,131 · Current $11,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about July 23, 2024, on the southside of the pack house, employees utilized MPS Box Maker Machine with the guard/limit switch removed during box moulding operations.
Recent events (2)
- — I (S) $11250
- — Z (S) $16131
1910.303 F02
- Issued
- Sep 18, 2024
- Penalty
- Initial $16,131 · Current $11,250 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: On or about July 23, 2024, on the Northside of the Pack House, employees accessed areas where electrical switches inside the main electrical panels were not marked to indicate their purpose in the following instances: a) Electrical Panel 1 - Feeds Conveyor 1 b) Electrical Panel 2 - Feeds Conveyor 2
Recent events (2)
- — I (S) $11250
- — Z (S) $16131
1910.303 G02 I
- Issued
- Sep 18, 2024
- Abate by
- Oct 29, 2024
- Penalty
- Initial $16,131 · Current $11,250 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): On or about July 23, 2024, on the Northside of the Pack House, employees accessed areas where the electrical panel covers to the main electrical breakers were left open in the following instances: 1.) Electrical Panel 1 - Feeds Conveyor 1 2.) Electrical Panel 2 - Feeds Conveyor 2
Recent events (2)
- — I (S) $11250
- — Z (S) $16131
More inspections in this industry (NAICS 111419)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347637662.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.