SAN ANTONIO, TX —
OSHA Inspection: JADCAP TOOL & DIE, MACHINE WORKS, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JADCAP TOOL & DIE, MACHINE WORKS, INC in 3621 SOUTHWEST MILITARY DRIVE, SAN ANTONIO, TX 78211 (NAICS 332999). OSHA activity number 347639528.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JADCAP TOOL & DIE, MACHINE WORKS, INC
- Site address
- 3621 SOUTHWEST MILITARY DRIVE
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78211
- Mailing
- 3621 SOUTHWEST MILITARY DRIVE, SAN ANTONIO, TX 78211
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 9
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.184 C14
- Issued
- Dec 4, 2024
- Abate by
- Dec 24, 2024
- Penalty
- Initial $2,074 · Current $1,037 Reduced
General-duty citation text
29 CFR 1910.184(c)(14):Employers must not use slings without affixed and legible identification markings. On or about July 24, 2024, and at times prior to, in the CNC machine area of the workshop, employees were utilizing slings to move equipment/products that did not have legible manufacturer markings.
Recent events (2)
- — I (S) $1037.01
- — Z (S) $2074
1910.212 A03 II
- Issued
- Dec 4, 2024
- Abate by
- Dec 24, 2024
- Penalty
- Initial $2,765 · Current $1,383 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):The point of operation of machines whose operation exposed an employee to injury, was not guarded: On or about July 24, 2024, and at times prior to, in the lathe area of the workshop, employees were utilizing a lathe to mill metal parts without utilizing the chuck guard.
Recent events (2)
- — I (S) $1382.51
- — Z (S) $2765
1910.212 B
- Issued
- Dec 4, 2024
- Abate by
- Dec 24, 2024
- Penalty
- Initial $2,765 · Current $1,383 Reduced
General-duty citation text
29 CFR 1910.212(b):Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving. On or about July 24, 2024, and at times prior to, in the lathe area of the workshop, employees were utilizing a bench grinder that was not securely anchored to finish/shape tools and other products.
Recent events (2)
- — I (S) $1382.51
- — Z (S) $2765
1910.215 A01
- Issued
- Dec 4, 2024
- Abate by
- Dec 24, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(1):Abrasive wheel(s) used on grinding machinery were not used with safety guard(s). On or about July 24, 2024 and at times prior thereto, in the lathe area of the facility, employees were utilizing a bench grinder without guarding to finish/shape tools and other products.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.253 B02 II
- Issued
- Dec 4, 2024
- Abate by
- Dec 24, 2024
- Penalty
- Initial $2,765 · Current $1,383 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(ii):Inside of buildings, cylinders were not stored in a well-protected, well-ventilated, dry location, at least 20 feet (6.1 m) from highly combustible materials such as oil or excelsior. On or about July 24, 2024, and at times prior to, in the welding area of the workshop, oxygen and acetylene cylinders were not secured in a well protected manner or away from combustible materials.
Recent events (2)
- — I (S) $1382.51
- — Z (S) $2765
1910.303 B07 IV
- Issued
- Dec 4, 2024
- Abate by
- Dec 24, 2024
- Penalty
- Initial $2,074 · Current $1,037 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(iv):There shall be no damaged parts that may adversely affect safe operation of the equipment, such as parts that are broken. On or about July 24, 2024 and times prior thereto, in the manual milling area, employees were utilizing a milling machine with a missing button to mill machine parts into products.
Recent events (2)
- — I (S) $1037.01
- — Z (S) $2074
1910.303 G01 II
- Issued
- Dec 4, 2024
- Penalty
- Initial $2,074 · Current $1,037 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(ii):The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage. On or about July 24, 2024 in the CNC machine area of the workshop, and times prior thereto, employees were storing items by utilizing the safety shut-off switch to the CNC machine as a hanger for a laptop bag.
Recent events (2)
- — I (S) $1037.01
- — Z (S) $2074
More inspections at Jadcap Tool & DIE, Machine Works, INC
View Jadcap Tool & DIE, Machine Works, INC's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347639528.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.