GLEN MILLS, PA —
OSHA Inspection: HEIDELBERG MATERIALS NORTHEAST LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HEIDELBERG MATERIALS NORTHEAST LLC in 533 FORGE ROAD, GLEN MILLS, PA 19342 (NAICS 327310). OSHA activity number 347662553.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HEIDELBERG MATERIALS NORTHEAST LLC
- Site address
- 533 FORGE ROAD
- City
- GLEN MILLS
- State
- PA
- ZIP
- 19342
- Mailing
- 533 FORGE ROAD, GLEN MILLS, PA 19342
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327310
- Employees
- 562
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.303 B01
- Issued
- Jan 30, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $16,550 · Current $12,413 Reduced
General-duty citation text
1910.303(b)(1): Electrical equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees, in that the employer shall ensure the safety of the equipment pursuant to the considerations in sections (i) through (viii) of 29 CR 1910.303(b)(1) a) Jobsite located at 933 West Forge Road, Glen Mills, PA. - Asphalt plant, Motor Control Center (MCC)- An employee was exposed to electrical equipment that was not maintained or serviced while resetting a 480-volt breaker. Condition noted on or about July 31, 2024.
Recent events (3)
- — F (S) $12412.5
- — C (S) $16550
- — Z (S) $16550
1910.36 D01
- Issued
- Jan 30, 2025
- Abate by
- Feb 11, 2025
- Penalty
- Initial $11,823 · Current $8,867 Reduced
General-duty citation text
29 CFR 1910.37(b)(1): Each exit was not adequately lighted so that an employee with normal vision can see along the exit route: a) Jobsite located at 933 West Forge Road, Glen Mills, PA. - Asphalt plant, MCC- The employer did not ensure that emergency lighting was utilized inside the MCC in case of an emergency, thus exposing employees to egress hazards. Condition observed on or about August 2, 2024.
Recent events (3)
- — F (O) $8867.25
- — C (S) $11823
- — Z (S) $11823
1910.36 D01
- Issued
- Jan 30, 2025
- Abate by
- Feb 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.36(d)(1): Employees must be able to open an exit route door from the inside at all times without keys, tools, or special knowledge. A device such as a panic bar that locks only from the outside is permitted on exit discharge doors: a) Jobsite located at 933 West Forge Road, Glen Mills, PA. - Asphalt plant, MCC- The employer did not ensure that a panic bar was installed on the exit doors inside the MCC in case of an emergency, thus exposing employees to hazards during an emergency. Condition observed on or about August 2, 2024.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.37 B02
- Issued
- Jan 30, 2025
- Abate by
- Feb 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) Jobsite located at 933 West Forge Road, Glen Mills, PA. - Asphalt plant, MCC- The employer did not ensure that exits were visibly marked with an "exit" sign as required. Condition was observed on or about August 2, 2024.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.303 B07 IV
- Issued
- Jan 30, 2025
- Abate by
- Feb 11, 2025
- Penalty
- Initial $11,823 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(iv): There were damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action or overheating: a) Jobsite located at 933 West Forge Road, Glen Mills, PA. - Asphalt Plant- The employer did not ensure that the outdoor metal electrical box that was attached the asphalt plant conveyor system was not deteriorated, thus exposing employees to electrical hazards. Condition observed on or about August 2, 2024.
Recent events (3)
- — F (S) $0
- — C (S) $11823
- — Z (S) $11823
1910.303 G01 II
- Issued
- Jan 30, 2025
- Penalty
- Initial $16,550 · Current $16,550
General-duty citation text
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: a) Jobsite located at 933 West Forge Road, Glen Mills, PA. - Asphalt plant, MCC- The employer did not ensure that the MC room's electrical system, which has rated electrical system of approximately 480 volts was kept clear at all times and was utilized for intermittent/incidental storage of nonpermanent equipment/materials, or furniture, which could interfere with ready access to the electric equipment in the event of an emergency, thus exposing employees to electrical shock and fire hazards. Condition noted on or about August 2, 2024.
Recent events (3)
- — F (O) $16550
- — C (S) $16550
- — Z (S) $16550
1910.334 B02
- Issued
- Jan 30, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $11,823 · Current $11,823
General-duty citation text
29 CFR 1910.334(b)(2): Reclosing circuits after protective device operation. After a circuit is deenergized by a circuit protective device, the circuit may not be manually reenergized until it has been determined that the equipment and circuit can be safely energized. The repetitive manual reclosing of circuit breakers or reenergizing circuits through replaced fuses is prohibited. a) Jobsite located at 933 West Forge Road, Glen Mills, PA. - Asphalt plant, MCC- The employer did not ensure that manual reclosing of circuit breakers after de-energized by a circuit protective device, be manually reenergized without determining that the equipment and circuit can be safely energized. Condition noted on or about August 2, 2024.
Recent events (3)
- — F (O) $11823
- — C (S) $11823
- — Z (S) $11823
1910.335 A01 I
- Issued
- Jan 30, 2025
- Abate by
- Feb 11, 2025
- Penalty
- Initial $11,823 · Current $8,867 Reduced
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed: a) Jobsite located at 933 West Forge Road, Glen Mills, PA. - Asphalt plant, MCC- The employer did not ensure that electrical personal protective equipment (PPE) was provided to employees who reenergized a 480-volt circuit breaker. Condition was noted on or about August 2, 2024.
Recent events (3)
- — F (O) $8867.25
- — C (S) $11823
- — Z (S) $11823
More inspections at Heidelberg Materials Northeast LLC
View Heidelberg Materials Northeast LLC's full OSHA safety record →
More inspections in this industry (NAICS 327310)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347662553.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.