BELTSVILLE, MD —
OSHA Inspection: CPF LLC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of CPF LLC in 10300 BALTIMORE AVE, BELTSVILLE, MD 20705 (NAICS 221121). OSHA activity number 347666331.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CPF LLC
- Site address
- 10300 BALTIMORE AVE
- City
- BELTSVILLE
- State
- MD
- ZIP
- 20705
- Mailing
- 180 JIBSAIL DRIVE, PRINCE FREDERICK, MD 20678
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 221121
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 31, 2025
- Abate by
- Feb 10, 2025
- Penalty
- Initial $16,550 · Current $0 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees exposing them to a struck-by hazard: a) On or about August 2, 2024, at a worksite located at 10300 Baltimore Ave. Beltsville, MD, the employer allowed employees to off-load shoring panels with a Caterpillar 926 front end loader which was equipped with a fork attachment that was not large enough to safely support the panels, causing them to be unsecured and unbalanced. This activity exposed employees to a struck-by hazard which resulted in a fatality. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet). In addition, documentation demonstrating that the abatement is complete must be included with your certification. This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $16550
1926.602 C01 I
- Issued
- Jan 31, 2025
- Abate by
- Feb 10, 2025
- Penalty
- Initial $16,550 · Current $0 Reduced
General-duty citation text
29 CFR 1926.602(c)(1)(i): Lifting and hauling equipment did not have the rated capacity clearly posted on the vehicle so as to be clearly visible to the operator: a) On or about August 2, 2024, at a worksite at 10300 Baltimore Ave. Beltsville, MD, The Caterpillar 926 did not have a plate identifying the information for attachment and the available plates were neither filled out nor legible. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $16550
1926.21 B02
- Issued
- Jan 31, 2025
- Abate by
- Apr 18, 2025
- Penalty
- Initial $0 · Current $16,550
General-duty citation text
1926.21(b)(2) The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury. a) On or about August 2, 2024, at a worksite located at 10300 Baltimore Ave. Beltsville, MD, employees were exposed to struck by hazards while standing on an unscecured, unbalanced load. The employees were unloading shoring panels with a Caterpillar 926 front end loader and were not trained in the recognition and avoidance of unsafe conditions. b) On or about August 2, 2024, at a worksite at 10300 Baltimore Ave. Beltsville, MD, employees were exposed to struck by hazards while working around a Caterpillar 926 front end loader. The operator was in the process of off-loading shoring panels, with employees standing on the panels, which were unsecured and unbalanced. The operator was not trained to recognize the hazards and unsafe conditions associated with the equipment and the operation. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet). In addition, documentation demonstrating that the abatement is complete must be included with your certification. This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (O) $16550
- — Z (S) $0
More inspections in this industry (NAICS 221121)
More inspections in MD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347666331.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.