BATESVILLE, MS —
OSHA Inspection: ACI BUILDING SYSTEMS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ACI BUILDING SYSTEMS, LLC in 10125 HIGHWAY 6 WEST, BATESVILLE, MS 38606 (NAICS 332311). OSHA activity number 347676850.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACI BUILDING SYSTEMS, LLC
- Site address
- 10125 HIGHWAY 6 WEST
- City
- BATESVILLE
- State
- MS
- ZIP
- 38606
- Mailing
- P. O. BOX 1316, BATESVILLE, MS 38606
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332311
- Employees
- 148
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 6, 2024
- Abate by
- Sep 30, 2024
- Penalty
- Initial $10,578 · Current $6,347 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. (a) Facility - On or about August 8, 2024 the employer did not ensure procedures specific to each machine were developed, documented and utilized for the control of energy sources of equipment such as but not limited to Bradbury machines when employees performed servicing and maintenance, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $6346.8
- — Z (S) $10578
1910.147 C06 I
- Issued
- Sep 6, 2024
- Abate by
- Sep 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. (a) Facility - On or about August 8, 2024 the employer did not complete the required periodic inspection of their energy control procedures, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Sep 6, 2024
- Abate by
- Sep 30, 2024
- Penalty
- Initial $7,052 · Current $4,231 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. (a) Building 2 Maintenance Shop - On or about August 8, 2024 the Central Machinery floor drill press did not have a guard, exposing employees to hazards such as those created by point of operation and rotating parts. (b) Bradbury PBR Conveyor - On or about August 8, 2024 employees were exposed to caught-in hazards from unguarded rotating parts.
Recent events (2)
- — I (S) $4231.2
- — Z (S) $7052
1910.215 A04
- Issued
- Sep 6, 2024
- Abate by
- Sep 30, 2024
- Penalty
- Initial $5,288 · Current $3,173 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): On offhand grinding machines, work rests were not used to support the work and/or were not kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. (a) Building 2 Maintenance Shop - On or about August 8, 2024 the employer did not have the tool rest guard adjusted to one eighth inch from the grinding wheel on a Baldor 6-inch bench grinder exposing the employee to a struck-by hazard.
Recent events (2)
- — I (S) $3172.8
- — Z (S) $5288
1910.215 B09
- Issued
- Sep 6, 2024
- Abate by
- Sep 30, 2024
- Penalty
- Initial $5,288 · Current $3,173 Reduced
General-duty citation text
29 CFR 1910.215(b)(9):29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. (a) Building 2 Maintenance Shop - On or about August 8, 2024 the employer did not have the tongue guard adjusted to one fourth inch from the grinding wheel on a Baldor bench grinder exposing the employee to a struck-by hazard.
Recent events (2)
- — I (S) $3172.8
- — Z (S) $5288
More inspections in this industry (NAICS 332311)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347676850.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.