FAIRBURN, GA —
OSHA Inspection: AMERICAN MARITIME SERVICES OF NJ INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AMERICAN MARITIME SERVICES OF NJ INC. in 610 BOHANNON ROAD, FAIRBURN, GA 30213 (NAICS 333924). OSHA activity number 347680761.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERICAN MARITIME SERVICES OF NJ INC.
- Site address
- 610 BOHANNON ROAD
- City
- FAIRBURN
- State
- GA
- ZIP
- 30213
- Mailing
- 1 PENNVAL RD P.O. BOX 568, WOODBRIDGE, NJ 07095
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333924
- Employees
- 75
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.252 B02 III
- Issued
- Dec 5, 2024
- Penalty
- Initial $11,524 · Current $5,162 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Protection from arc welding rays. Where the work permits, the welder should be enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or shall be enclosed with noncombustible screens similarly painted. Booths and screens shall permit circulation of air at floor level. Workers or other persons adjacent to the welding areas shall be protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles. a) Fabrication Area, Welding area: On or about August 12, 2024, and at times prior, the employer exposed employees to eye injury hazards, in that welding areas were not enclosed with appropriate screens or shields.
Recent events (2)
- — I (S) $5162
- — Z (S) $11524
1910.252 C02 I
- Issued
- Dec 5, 2024
- Abate by
- Jan 6, 2025
- Penalty
- Initial $11,524 · Current $5,162 Reduced
General-duty citation text
29 CFR 1910.252(c)(2)(i): Mechanical ventilation was not provided when welding or cutting was done on metals not covered in 29 CFR 1910.252(c)(5) through 29 CFR 1910.252 (c)(12)(a). a) Fabrication Area, Welding area: On or about August 12, 2024, and at times prior, the employer exposed employees to respiratory hazards, in that welding areas were not provided with mechanical exhaust ventilation while employees perform grinding and welding operations on steel parts.
Recent events (2)
- — I (S) $5162
- — Z (S) $11524
1910.253 B04 III
- Issued
- Dec 5, 2024
- Penalty
- Initial $9,218 · Current $5,162 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii):Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least. a) East Wall, Storage Cylinder Rack: On or about August 12, 2024, and at times prior, the employer exposed employees to fire hazards, in that acetylene and oxygen cylinders were not separated at a minimum distance of 20 feet while stored.
Recent events (2)
- — I (S) $5162
- — Z (S) $9218
1903.2 A01
- Issued
- Dec 5, 2024
- Penalty
- Initial $1,294 · Current $1,294
General-duty citation text
29 CFR 1903.2(a)(1): The employer did not post and keep posted OSHA notices informing employees of the protections and obligations provided for in the Act, and that for assistance and information, including copies of the Act and of specific safety and health standards, employees should contact the employer or the nearest office of the Department of Labor. a) Facility: On or about August 12, 2024, and at times prior, the employer did not ensure to post and keep posted OSHA notices on a conspicuous place to inform employees of the protections and obligations provided for in the Act at their facility located at 610 Bohannon Road, in Fairburn, Georgia.
Recent events (2)
- — I (O) $1294
- — Z (O) $1294
1910.178 L02 II
- Issued
- Dec 5, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. a) Facility: On or about August 12, 2024, and at times prior, the employer exposed employees to struck-by hazards, in that the employer did not ensure each operator had successfully completed training consisting of a combination of formal instruction, practical training, and evaluation of the operator's performance in the workplace before operating the Hyundai Forklift Model 40D-9 (Serial Number 225200240).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at American Maritime Services of NJ INC.
View American Maritime Services of NJ INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333924)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347680761.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.