OXFORD, OH —
OSHA Inspection: AXL MECHANICAL LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AXL MECHANICAL LLC in 43 E HIGH ST, OXFORD, OH 45056 (NAICS 238220). OSHA activity number 347684581.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AXL MECHANICAL LLC
- Site address
- 43 E HIGH ST
- City
- OXFORD
- State
- OH
- ZIP
- 45056
- Mailing
- 1770 MASON MORROW MILLGROVE RD, LEBANON, OH 45036
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.30 A01
- Issued
- Sep 3, 2024
- Abate by
- Sep 27, 2024
- Penalty
- Initial $6,452 · Current $6,452
General-duty citation text
29 CFR 1910.30(a)(1):(a) Fall hazards. (1) Before any employee is exposed to a fall hazard, the employer must provide training for each employee who uses personal fall protection systems or who is required to be trained as specified elsewhere in this subpart. Employers must ensure employees are trained in the requirements of this paragraph on or before May 17, 2017. a) On or about August 13, 2024, the employer failed to trained to recognize fall hazards such as, but not limited to, a fall hazard greater than 10 ft while performing HVAC work on a commercial structure, nor were they trained on when to utilize a fall protection system.
Recent events (2)
- — I (S) $6452
- — Z (S) $6452
1910.23 B08
- Issued
- Sep 3, 2024
- Penalty
- Initial $6,452 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(b)(8):(8) General requirements for all ladders. The employer must ensure: Ladders are used only for the purposes for which they were designed a) On or about August 13, 2024, an employee was observed using a folded up Werner A-frame ladder on a pitched roof to perform HVAC work that was not being used for the purpose it was designed.
Recent events (2)
- — I (S) $0
- — Z (S) $6452
1910.28 B01 I
- Issued
- Sep 3, 2024
- Penalty
- Initial $6,452 · Current $0 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i):(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following: (A) Guardrail systems; (B) Safety net systems; or (C) Personal fall protection systems, such as personal fall arrest, travel restraint, or positioning systems. a) On or before August 13, 2024, the employer failed to ensure that employees performing HVAC work on a commercial structure were utilizing a fall protection system. As a result, employees were exposed to fall heights of 11'.
Recent events (2)
- — I (S) $0
- — Z (S) $6452
More inspections in this industry (NAICS 238220)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347684581.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.