Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FRESH VALLEY FOODS CORPORATION

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of FRESH VALLEY FOODS CORPORATION in 447 WEST LOWELL AVENUE, HAVERHILL, MA 01835 (NAICS 424480). OSHA activity number 347689275.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Fresh Valley Foods Corporation — free Get an email when a new federal OSHA severe-injury report for Fresh Valley Foods Corporation is published. One employer, no account, unsubscribe in one click.
Site address
447 WEST LOWELL AVENUE
City
HAVERHILL
State
MA
ZIP
01835
Mailing
447 WEST LOWELL AVENUE, HAVERHILL, MA 01835
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
424480
Employees
37
Ownership type
A

4 citations on file for this inspection.

1903.19 D01

Other-than-serious 1 instance 3 exposed
Issued
Mar 24, 2025
Abate by
Apr 28, 2025
Penalty
Initial $930 · Current $0 Reduced
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  Location - Production floor.  On or about 3/15/2025, the employer did not provide an adequate lockout/tagout procedure for the Heinzen Celery Segment Cutter.
Recent events (3)
  • — F (O) $0
  • — C (O) $930
  • — Z (O) $930

1910.147 C04 II

Other-than-serious Gravity 10 1 instance 3 exposed
Issued
Oct 16, 2024
Abate by
Nov 20, 2024
Penalty
Initial $14,518 · Current $5,000 Reduced
1910.147(c)(4)(ii)  The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following: 29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  Location - Production floor.  On or about 8/15/2024, lockout/tagout procedures for the Heinzen Celery Segment Cutter did not contain adequately specific procedural steps for shutting down, isolating, blocking and securing the machine to control hazardous energy.
Recent events (3)
  • — F (O) $5000
  • — C (S) $14518
  • — Z (S) $14518

1910.147 C07 I

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Oct 16, 2024
Abate by
Nov 20, 2024
Penalty
Initial $14,518 · Current $0 Reduced
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices:  Location - Throughout.  On or about 8/15/2024, the employer did not provide training on the control of hazardous energy (lockout/tagout) to employees.
Recent events (3)
  • — F (S) $0
  • — C (S) $14518
  • — Z (S) $14518

1910.212 A01

Other-than-serious Gravity 10 1 instance 3 exposed
Issued
Oct 16, 2024
Abate by
Nov 20, 2024
Penalty
Initial $14,518 · Current $10,000 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Location - Production floor.  On or about 8/15/2024, the Heinzen Celery Segment Cutter was not guarded to protect employees from the knives/cutters within the machine.
Recent events (3)
  • — F (O) $10000
  • — C (S) $14518
  • — Z (S) $14518

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347689275.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.