OXFORD, AL —
OSHA Inspection: FG FRAMING, LLC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of FG FRAMING, LLC in 75 LARRY GARDNER DRIVE, OXFORD, AL 36203 (NAICS 238130). OSHA activity number 347689770.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FG FRAMING, LLC
- Site address
- 75 LARRY GARDNER DRIVE
- City
- OXFORD
- State
- AL
- ZIP
- 36203
- Mailing
- 3500 COUNTY ROAD 151, JEMISON, AL 35085
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 12
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.20 B01
- Issued
- Jan 23, 2025
- Abate by
- Feb 19, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1926.20(b)(1):The employer did not initiate and maintain accident prevention programs as necessary to comply with this part: a) On or about 08/14/2024; At the jobsite located at 75 Larry Gardner Drive, Oxford, AL; the employer failed to implement an accident prevention programs related to incidents that occurred on the job site when employees are exposed to construction hazards such as but not limited to falls, caught-in or- between, struck by and electrocution hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $6620
1926.20 B02
- Issued
- Jan 23, 2025
- Abate by
- Feb 19, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1926.20(b)(2):The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s) a) On or about 09/24/2024; At the jobsite located at 75 Larry Gardner Drive, Oxford, AL; the employer failed to frequently or regularly inspect the jobsite to protect employees from construction hazards such as but not limited to falls, caught-in or- between, struck by and electrocution hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $6620
1926.502 D16 III
- Issued
- Jan 23, 2025
- Abate by
- Feb 12, 2025
- Penalty
- Initial $16,550 · Current $16,550
General-duty citation text
29 CFR 1926.502(d)(16)(iii): Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level: a) On or about 08/14/2024, at 75 Larry Gardner Drive, Oxford, AL: the employer exposed employees to fall hazards, in that, an employee was doing framing work at approximately 13 feet heigh when his personal fall arrest system was not rigged in a way that he could not free fall more than 6 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $16550
1926.503 A01
- Issued
- Jan 23, 2025
- Abate by
- Feb 19, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) On or about 08/14/2024, at 75 Larry Gardner Drive, Oxford, AL; the employer exposed employees to fall hazards, in that fall protection training was not provided to employee while doing framing work at 6 feet height or more. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $6620
More inspections in this industry (NAICS 238130)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347689770.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.