STAFFORD SPRINGS, CT —
OSHA Inspection: AMERICAN WOOLEN COMPANY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AMERICAN WOOLEN COMPANY, INC. in 8 FURNACE AVENUE, STAFFORD SPRINGS, CT 06076 (NAICS 313210). OSHA activity number 347692899.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERICAN WOOLEN COMPANY, INC.
- Site address
- 8 FURNACE AVENUE
- City
- STAFFORD SPRINGS
- State
- CT
- ZIP
- 06076
- Mailing
- 8 FURNACE AVENUE, STAFFORD SPRINGS, CT 06076
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 313210
- Employees
- 46
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.22 D02
- Issued
- Aug 28, 2024
- Abate by
- Oct 16, 2024
- Penalty
- Initial $4,839 · Current $3,387 Reduced
General-duty citation text
29 CFR 1910.22(d)(2): The employer did not ensure that hazardous conditions on walking-working surfaces are corrected or repaired before an employee uses the walking-working surface again. The employer did not ensure that if the correction or repair cannot be made immediately, the hazard is guarded to prevent employees from using the walking-working surface until the hazard is corrected or repaired. On, or about, August 16, 2024, in the following locations, floor holes for the drainage system were not properly covered due to damaged and/or missing covers: A. Near Multi-Set Machine: Two sections of the metal trench covers were covered with plywood because they were bent and either did not stay in the L-channel guide or created a tripping hazard. B. Decommissioned Napping Machine: A metal trench cover had fallen into the floor hole and pieces of cloth had been tied to the machine frame to act as an awareness barrier. C. Reconing Area: Metal trench covers were missing from two sections of the floor holes. Empty barrels and a tote had been placed over the trench to try to prevent anyone from stepping into it.
Recent events (2)
- — I (S) $3387.3
- — Z (S) $4839
1910.303 G02 I
- Issued
- Aug 28, 2024
- Penalty
- Initial $4,113 · Current $2,879 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): Carbonizer: On, or about, August 16, 2024, the cover was missing on two pressure switches mounted on the side of the oven enclosure, exposing electrical connections to accidental contact.
Recent events (2)
- — I (S) $2879.1
- — Z (S) $4113
1904.41 A01 I
- Issued
- Aug 28, 2024
- Penalty
- Initial $1,613 · Current $1,129 Reduced
General-duty citation text
29 CFR 1904.41(a)(1)(i): The establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and the establishment was classified in an industry listed in appendix A to subpart E of this part, and the employer did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee by the specified date: American Woolen Company, Inc., 8 Furnace Avenue, Stafford Springs, Connecticut: On, or about, August 16, 2024 the employer had not submitted the 2023 OSHA 300A data to the Injury Tracking Application database by March 2, 2024. The facility was classified under NAICS 313210 and had 41 employees.
Recent events (2)
- — I (O) $1129.1
- — Z (O) $1613
More inspections in this industry (NAICS 313210)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347692899.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.