HUNTLEY, IL —
OSHA Inspection: MOTIS, LLC DBA CARGO EQUIPMENT CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MOTIS, LLC DBA CARGO EQUIPMENT CORPORATION in 13700 GEORGE BUSH COURT, HUNTLEY, IL 60142 (NAICS 314999). OSHA activity number 347708257.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOTIS, LLC DBA CARGO EQUIPMENT CORPORATION
- Site address
- 13700 GEORGE BUSH COURT
- City
- HUNTLEY
- State
- IL
- ZIP
- 60142
- Mailing
- 13700 GEORGE BUSH COURT, HUNTLEY, IL 60142
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 314999
- Employees
- 32
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 D03
- Issued
- Dec 17, 2024
- Abate by
- Jun 2, 2025
- Penalty
- Initial $6,913 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) Sewing machine area - On or about August 23, 2024, the employer did not require utilization of an energy isolating device for maintenance of cord-and-plug Brother Sewing Machines thereby exposing employees to caught-in, pinch point, and struck-by hazards. (b) Sewing machine area - On or about August 23, 2024, the employer did not require utilization of an energy isolating device for maintenance of cord-and-plug Juki Sewing Machines thereby exposing employees to caught-in, pinch point, and struck-by hazards. Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
- — F (S) $3500
- — C (S) $6913
- — Z (S) $6913
1910.178 P01
- Issued
- Dec 17, 2024
- Abate by
- Jun 2, 2025
- Penalty
- Initial $11,524 · Current $700 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): a) Shipping and warehouse areas - On or about August 21, 2024, the employer required employees to operate the Hyster E60Z forklift truck that had a seatbelt restraint system removed thereby exposing employees to crushing hazards associated with forklift truck tipovers. b) Shipping and warehouse areas - On or about August 22, 2024, the employer required employees to operate the Toyota 5 FBE 18 forklift truck that had a seatbelt restraint system removed thereby exposing employees to crushing hazards associated with forklift truck tipovers. Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
- — F (S) $700
- — C (S) $11524
- — Z (S) $11524
1910.212 A01
- Issued
- Dec 17, 2024
- Abate by
- Jun 2, 2025
- Penalty
- Initial $9,218 · Current $5,800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (c) Sewing area - On or about August 23, 2024, the employer did not ensure that the eye protection cover was installed to sewing machines thereby exposing employees to hazards associated with flying metal fragments that may occur from needle breaks. Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
- — F (S) $5800
- — C (S) $9218
- — Z (S) $9218
1910.219 B01
- Issued
- Dec 17, 2024
- Abate by
- Jun 2, 2025
- Penalty
- Initial $11,524 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv): (a) Webbing cutting area - On or about August 23, 2024, the employer did not ensure that the pulley and flywheel installed to the green winding machine was guarded thereby exposing employees to hazards associated with in-running nip points. Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
- — F (S) $0
- — C (S) $11524
- — Z (S) $11524
1910.132 D02
- Issued
- Dec 17, 2024
- Abate by
- Jun 2, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: (a) Facility wide - On or about August 23, 2024, the employer did not complete a written certification of the personal protective equipment hazard assessment. Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 314999)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347708257.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.