OSHA Inspection: MANSANILLA INC. DBA MAYANCELA CONSTRUCTION INC.

Issued

Jun 9, 2025

Abate by

Jul 28, 2025

Penalty

Initial $398 · Current $398

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   Mansanilla Inc. dba Mayancela Construction Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number            Item Number                    Abatement Date  01                                01a                                   03/31/2025  01                                01b                                   03/31/2025  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).

Issued

Dec 18, 2024

Abate by

Mar 31, 2025

Penalty

Initial $4,839 · Current $2,000 Reduced

General-duty citation text

29 CFR 1926.20(b)(1): The employer did not initiate or maintain an accident prevention program(s) as may be necessary to comply with this part:   a) On or about August 23, 2024, the employer did not maintain programs to provide for compliance with the OSH Act to control or minimize the safety and health hazards associated with roofing work that his employees are required to perform.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Dec 18, 2024

Abate by

Mar 31, 2025

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) On or about August 23, 2024, employees were exposed to fall hazards while performing roofing work and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize those hazards.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Dec 18, 2024

Abate by

Jan 15, 2025

Penalty

Initial $2,765 · Current $1,200 Reduced

General-duty citation text

29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:   a) On August 23, 2024, employees were exposed to eye injury while operating a pneumatic nail gun without eye protection during roofing work.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Dec 18, 2024

Abate by

Jan 15, 2025

Penalty

Initial $4,839 · Current $4,000 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  a) On August 23, 2024, employees performing roofing work were exposed to fall hazards of approximately 23.5 feet.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.