Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UNLIMITED CONSTRUCTION SOLUTIONS

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of UNLIMITED CONSTRUCTION SOLUTIONS in 14975 S. MEMORIAL DRIVE, BIXBY, OK 74008 (NAICS 238910). OSHA activity number 347740342.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Unlimited Construction Solutions — free Get an email when a new federal OSHA severe-injury report for Unlimited Construction Solutions is published. One employer, no account, unsubscribe in one click.
Site address
14975 S. MEMORIAL DRIVE
City
BIXBY
State
OK
ZIP
74008
Mailing
328 N FALCON DR., OKLAHOMA CITY, OK 73127
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238910
Employees
30
Ownership type
A

4 citations on file for this inspection.

1926.1153 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 4, 2025
Abate by
Mar 21, 2025
Penalty
Initial $9,931 · Current $9,931
29 CFR  1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  On or about September 5, 2024, in the parking lot of the worksite, the employer did not fully and properly implement Table 1 when an employee was cutting concrete with a handheld power saw that did not have the integrated water delivery system connected and the employee was not in use of respiratory protection.
Recent events (1)
  • — Z (S) $9931

1926.1153 D02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 4, 2025
Abate by
Mar 21, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section.  On or about September 5, 2024, in the parking lot of the worksite, an employee was using a handheld power saw to cut concrete and the employer did not assess the employees exposure to respirable crystalline silica.
Recent events (1)
  • — Z (S) $0

1910.134 C

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 4, 2025
Abate by
Mar 21, 2025
Penalty
Initial $6,620 · Current $6,620
29 CFR  1910.134(c):The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use.  On or about September 5, 2024 and at times prior thereto, in the parking lot, employees use respiratory protection when cutting concrete and the employer did not provide and implement a written respiratory protection program.
Recent events (1)
  • — Z (S) $6620

1926.1153 I01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 4, 2025
Abate by
Mar 21, 2025
Penalty
Initial $9,931 · Current $9,931

Hazardous substances S103

29 CFR  1926.1153(i)(1): The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (HCS) (29 CFR 1910.1200), ensure that each employee has access to labels on containers of crystalline silica and safety data sheets, and is trained in accordance with the provisions of HCS and paragraph (i)(2) of this section.    On or about September 5, 2024 and at times prior thereto, in the parking lot of the worksite, an employee was using a handheld power saw to cut concrete and the employer did not establish a hazard communication program that included respirable crystalline silica.
Recent events (1)
  • — Z (S) $9931

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347740342.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.