IPSWICH, SD —
OSHA Inspection: CRAVEN CORNER FEEDERS, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of CRAVEN CORNER FEEDERS, INC. in 36170 138TH STREET, IPSWICH, SD 57451 (NAICS 112112). OSHA activity number 347745069.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CRAVEN CORNER FEEDERS, INC.
- Site address
- 36170 138TH STREET
- City
- IPSWICH
- State
- SD
- ZIP
- 57451
- Mailing
- 36168 138TH STREET, IPSWICH, SD 57451
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- B
- Migrant workforce
- X
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 112112
- Employees
- 11
- Ownership type
- A
Citations
4 citations on file for this inspection.
1928.57 A06
- Issued
- Jan 27, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1928.57(a)(6): At the time of initial assignment and at least annually thereafter, the employer did not instruct every employee in the safe operation and servicing of all covered equipment the employee would be involved: (a)Craven Corner Feeders, Inc. at 36170 138th Street, Ipswich, SD 57451: On or about and at times prior to September 9, 2024, the employer did not ensure employees were instructed annually in the safe operation of the John Deere tractor, model number 4440, serial number: RW4440P040225 and power take-off system involving the yellow pump tank implement. This condition exposed employees to caught-in hazard.
Recent events (1)
- — Z (S) $6620
1928.57 B01 III
- Issued
- Jan 27, 2025
- Abate by
- Feb 27, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1928.57(b)(1)(iii): Power take-off driven equipment was not guarded to protect against employee contact with positively driven rotating members of the power drive system: (a)Craven Corner Feeders, Inc. at 36170 138th Street, Ipswich, SD 57451: On or about and at times prior to September 9, 2024, the employer did not ensure the power take-off shaft connecting a John Deere Tractor, Model Number 4440, Serial Number: RW4440P040225 and mechanically powering a yellow pump tank implement was guarded. This condition exposed employees to caught-in and amputation hazards associated with the unguarded power take-off equipment.
Recent events (1)
- — Z (S) $6620
1928.57 B01 IV
- Issued
- Jan 27, 2025
- Abate by
- Feb 27, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1928.57(b)(1)(iv): Signs were not placed at prominent locations on tractors and power take-off driven equipment specifying that power drive system safety shields must be kept in place: (a)Craven Corner Feeders, Inc. at 36170 138th Street, Ipswich, SD 57451: On or about and at times prior to September 9, 2024, the employer did not ensure that signs specifying that power drive system safety shields must be kept in place were posted on power take-off equipment. This condition exposed employees to fatal caught-in and amputation hazards associated with the unmarked power take-off equipment.
Recent events (1)
- — Z (S) $0
1928.57 C02 I
- Issued
- Jan 27, 2025
- Abate by
- Feb 27, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1928.57(c)(2)(i): The mesh or nip-points of all power-driven gears, belts, chains, sheaves, pulleys, sprockets, and idlers were not guarded: (a)Craven Corner Feeders, Inc. at 36168 138th Street, Ipswich, SD 57451: On or about and at times prior to September 10, 2024, the employer did not ensure adequate guarding was in place on the east and west side of the Henke Machine, roller mill in the Mill Room Area, in that the belt and pulley system were open and not adequately guarded. This condition exposed employees to caught-in hazards associated with the unguarded belt and pulley. (b)Craven Corner Feeders, Inc. at 36168 138th Street, Ipswich, SD 57451: On or about and at times prior to September 10, 2024, the employer did not ensure adequate guarding was in place on the east side of the Renn Mill Center roller mill in the Mill Room Area, in that the belt and pulley system were open and not adequately guarded. This condition exposed employees to caught-in hazards associated with the unguarded belt and pulley.
Recent events (1)
- — Z (S) $0
More inspections at Craven Corner Feeders, INC.
View Craven Corner Feeders, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 112112)
More inspections in SD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347745069.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.