Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CHRISTIAN SAMANIEGO DBA ATHENA DEVELOPMENT GROUP GC. & MECHANICAL LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CHRISTIAN SAMANIEGO DBA ATHENA DEVELOPMENT GROUP GC. & MECHANICAL LLC in 1101 ELMHURST ROAD, DES PLAINES, IL 60016 (NAICS 238220). OSHA activity number 347756223.

Watch Christian Samaniego DBA Athena Development Group GC. & Mechanical LLC — free Get an email when a new federal OSHA severe-injury report for Christian Samaniego DBA Athena Development Group GC. & Mechanical LLC is published. One employer, no account, unsubscribe in one click.
Site address
1101 ELMHURST ROAD
City
DES PLAINES
State
IL
ZIP
60016
Mailing
211 E SCHILLER ST APT 1B, ELMHURST, IL 60126
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238220
Employees
3
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Apr 17, 2025
Abate by
May 13, 2025
Penalty
Initial $398 · Current $398
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Christian Samaniego dba Athena Development Group GC. & Mechanical LLC, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number                  Item Number                   Abatement Date  01                                                03                                         2-18-2025   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (O) $398

1926.451 E01

Serious Gravity 10 1 instance 3 exposed
Issued
Jan 22, 2025
Penalty
Initial $4,839 · Current $4,839
29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet above or below the point of access:  a) On September 16, 2024, employees were exposed to a fall hazards of approximately one story while accessing and egressing the work platform from a tubular frame welded scaffold.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4839

1926.501 B01

Serious Gravity 10 1 instance 3 exposed
Issued
Jan 22, 2025
Penalty
Initial $4,839 · Current $4,839
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  a) On September 16, 2024, employees were exposed to fall hazards of approximately one story while engaged in HVAC work without the use of fall protection.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4839

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 22, 2025
Abate by
Feb 18, 2025
Penalty
Initial $3,457 · Current $3,457
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) On or about September 16, 2024, employees were exposed to fall hazards of approximately one story while performing HVAC work and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize those hazards.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $3457

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347756223.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.