Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: COREYS HANDYMAN SERVICE LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of COREYS HANDYMAN SERVICE LLC in 1801 ERIN BROOKE DR, VALRICO, FL 33594 (NAICS 238160). OSHA activity number 347768970.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Coreys Handyman Service LLC — free Get an email when a new federal OSHA severe-injury report for Coreys Handyman Service LLC is published. One employer, no account, unsubscribe in one click.
Site address
1801 ERIN BROOKE DR
City
VALRICO
State
FL
ZIP
33594
Mailing
8408 NORTH 10TH ST, TAMPA, FL 33604
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 21, 2024
Penalty
Initial $4,148 · Current $4,148
29 CFR  1926.100(a):Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects:  a.) At the worksite, located at 1801 Erin Brooke Dr Valrico, FL 33594; On or about 9/20/24, the employer exposed employees to struck by hazards in that head protection was not used by employees on the ground level while overhead framing operations approximately 10 ft in height were conducted on a newly constructed residential home extension while using pneumatic nail guns, plywood wood and a Makita circular saw.
Recent events (1)
  • — Z (S) $4148

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 21, 2024
Penalty
Initial $3,457 · Current $3,457
29 CFR  1926.102(a)(1):The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles:  a.) At the worksite, located at 1801 Erin Brooke Dr Valrico, FL 33594; On or about 9/20/24, the employer exposed employees to struck by hazards in that eye protection was not used by employees while framing operations were conducted on a newly constructed residential home extension with the use of pneumatic nail guns and a Makita circular saw.
Recent events (1)
  • — Z (S) $3457

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Nov 21, 2024
Penalty
Initial $4,839 · Current $4,839
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  a.) At the worksite, located at 1801 Erin Brooke Dr Valrico, FL 33594; On or about 9/20/24, the employer exposed employees to fall hazards of approximately 10 ft in that fall protection was not used or provided for employees while framing operations were conducted on a newly constructed residential home extension.
Recent events (1)
  • — Z (S) $4839

1926.503 A01

Other-than-serious 1 instance 2 exposed
Issued
Nov 21, 2024
Penalty
Initial $388 · Current $388
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   a.) At the worksite, located at 1801 Erin Brooke Dr Valrico, FL 33594; On or about 9/20/24, the employer exposed employees to fall hazards of approximately 10 ft in that training in fall protection and the recognition of fall hazards was not provided for employees while framing operations were conducted on a newly constructed residential home extension.
Recent events (1)
  • — Z (O) $388

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347768970.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.