CUMBERLAND, RI —
OSHA Inspection: HINDLEY MANUFACTURING CO., INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HINDLEY MANUFACTURING CO., INC. in 9 HAVENS STREET, CUMBERLAND, RI 02864 (NAICS 333517). OSHA activity number 347779142.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HINDLEY MANUFACTURING CO., INC.
- Site address
- 9 HAVENS STREET
- City
- CUMBERLAND
- State
- RI
- ZIP
- 02864
- Mailing
- 9 HAVENS STREET, CUMBERLAND, RI 02864
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333517
- Employees
- 55
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 17, 2025
- Abate by
- Mar 6, 2025
- Penalty
- Initial $5,627 · Current $2,814 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. a) M59 Machine #367: On or about September 26, 2024, an employee was exposed to ingoing nip points on the M59 Machine #367 when Lockout Tagout was not utilized during servicing or maintenance activities.
Recent events (2)
- — I (S) $2813.5
- — Z (S) $5627
1910.147 C04 II B
- Issued
- Jan 17, 2025
- Abate by
- Mar 6, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. a) M59 Machine #367: On or about September 26, 2024, the employer had not clearly and specifically outlined the steps for shutting down, isolating , blocking and securing the M59 Machine #367 when employees were performing maintenance work on the machine.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I B
- Issued
- Jan 17, 2025
- Abate by
- Mar 6, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure. a) M59 Machine #367: On or about September 26, 2024, an employee did not receive instructions in the purpose and use of the energy control procedure, while exposed to ingoing nip points on the M59 Machine #367.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 F03 I
- Issued
- Jan 17, 2025
- Abate by
- Mar 6, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(i): When servicing and/or maintenance is performed by a crew, craft, department or other group, they shall utilize a procedure which affords the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device. a) M59 Machine #367: On or about September 26, 2024, two employees performed work on the M59 Machine #367 during servicing and/or maintenance activities and did not utilizing a procedure which afforded the employees a level of protection equivalent to personal lockout or tagout devices.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jan 17, 2025
- Abate by
- Mar 6, 2025
- Penalty
- Initial $5,627 · Current $2,814 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a) M59 Machine #367: On or about September 26, 2024, an employee was exposed to unguarded ingoing nip points on the M59 Machine #367 during setup procedures.
Recent events (2)
- — I (S) $2813.5
- — Z (S) $5627
More inspections at Hindley Manufacturing CO., INC.
View Hindley Manufacturing CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333517)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347779142.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.