Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CUSTOM AGRI SYSTEMS INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CUSTOM AGRI SYSTEMS INC in 5469, NORTH LAWRENCE, OH 44666 (NAICS 238290). OSHA activity number 347789018.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Custom Agri Systems INC — free Get an email when a new federal OSHA severe-injury report for Custom Agri Systems INC is published. One employer, no account, unsubscribe in one click.
Site address
5469
City
NORTH LAWRENCE
State
OH
ZIP
44666
Mailing
255 COUNTY ROAD R, NAPOLEON, OH 43545
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238290
Employees
253
Ownership type
A

3 citations on file for this inspection.

1926.1404 D01

Serious Gravity 10 1 instance 2 exposed
Issued
Dec 2, 2024
Penalty
Initial $16,131 · Current $22,500
29 CFR  1926.1404(d)(1):Before commencing assembly/disassembly operations, the A/D director must ensure that the crew members understand all of the following:  On or about September 26, 2024, at a worksite located at 5469 Deerfield Avenue, North Lawrence, Ohio, the employer did not ensure millwright employees working as crew members commencing in the assembly and disassembly operation of a swing-away boom extension, also known as a jib, of a rented Grove TMS500E 50-ton mobile crane were given crew instructions by an Assembly/Disassembly (A/D) Director to ensure the millwright employees understood their tasks, the hazards associated with their tasks, and the hazardous positions/locations they needed to avoid.  The millwright employees were not provided with instruction to ensure they understood the assembly/disassembly tasks that included, installing and removing the left and right side attachment pins of the boom extension and the operation of the boom extension rear stowage bracket handle and hitch pins [per 1926.1404(d)(1)(i], the hazards associated with installing and removing the left and right side attachment pins of the swing-away boom extension and the operation of the boom extension rear stowage bracket handle and pins [per 1926.1404(d)(i)(ii)], and the hazardous positions/locations they needed to avoid such as, working from a ladder under the boom extension to remove the left and right side attachment pins and on the crane deck under the boom extension near rear stowage bracket [per 1926.1404(d)(1)(iii)].
Recent events (2)
  • — I (S) $22500
  • — Z (S) $16131

1926.1404 F01

Serious Gravity 10 1 instance 2 exposed
Issued
Dec 2, 2024
Penalty
Initial $16,131 · Current $0 Reduced
29 CFR  1926.1404(f)(1):When pins (or similar devices) are being removed, employees must not be under the boom, jib, or other components, except where the requirements of paragraph (f)(2) of this section are met.  On or about September 26, 2024, at a worksite located at 5469 Deerfield Avenue, North Lawrence, Ohio, the employer did not ensure the two millwright employees assisting in the disassembly of the swing-away boom extension, also known as a jib, of a rented Grove TMS500E 50-ton mobile crane, were not under the swing-away boom extension when the left and right side attachment pins of the swing-away boom extension were removed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $16131

1926.1427 F01 I

Other-than-serious 1 instance 2 exposed
Issued
Dec 2, 2024
Abate by
Jan 21, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.1427(f)(1): Through an evaluation, the employer must ensure that each operator is qualified by a demonstration of:  On or about October 2, 2024, the employer did not ensure an evaluation of each crane operator was conducted and/or documented to ensure crane operators were qualified to operate mobile cranes, by a demonstration of their skills and knowledge of operating the crane equipment safety.  Crane operators operate mobile type cranes owned by the employer from there Upper Sandusky, Ohio, Attica, Ohio, and Napoleon, Ohio facilities.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Custom Agri Systems INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347789018.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.