TULSA, OK —
OSHA Inspection: FABRICATION SOLUTIONS, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FABRICATION SOLUTIONS, LLC in 109 S 122ND E AVE, TULSA, OK 74128 (NAICS 332999). OSHA activity number 347795585.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FABRICATION SOLUTIONS, LLC
- Site address
- 109 S 122ND E AVE
- City
- TULSA
- State
- OK
- ZIP
- 74128
- Mailing
- 109 S 122ND E AVE, TULSA, OK 74128
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.132 D01
- Issued
- Mar 17, 2025
- Abate by
- Mar 31, 2025
- Penalty
- Initial $6,620 · Current $3,310 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment(PPE). On or about September 26, 2024, and at times prior thereto, in the welding area, the employer did not assess for hazards where employees were performing welding work activities and require the use of protective equipment.
Recent events (2)
- — I (S) $3310
- — Z (S) $6620
1910.252 B03
- Issued
- Mar 17, 2025
- Abate by
- Apr 4, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(b)(3): Employees exposed to the hazards created by welding, cutting, or brazing operations were not protected by personal protective equipment (PPE) in accordance with the requirements of 29 CFR 1910.132 Appropriate protective clothing required for welding operation will vary with the size, nature and location of the work to be performed. On or about September 26, 2024 and at times prior thereto, employees were performing welding work activities without the use of PPE as required by 29 CFR 1910.132.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.252 A02 VII
- Issued
- Mar 17, 2025
- Abate by
- Apr 4, 2025
- Penalty
- Initial $3,783 · Current $1,892 Reduced
General-duty citation text
29 CFR 1910.252(a)(2)(vii): Where practicable, combustible materials were not relocated at least 35 feet (10.7 m) from the cutting or welding operation work site. On or about October 3,2024, in the welding area, employees were performing welding work activities in an area where combustible materials such as cardboard materials were located in the work area.
Recent events (2)
- — I (S) $1891.5
- — Z (S) $3783
1910.254 D09 III
- Issued
- Mar 17, 2025
- Abate by
- Apr 4, 2025
- Penalty
- Initial $5,675 · Current $2,838 Reduced
General-duty citation text
29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replaced. On or about October 26, 2024 and at times prior thereto, in middle welding bay, employees were performing welding work activities with a welding lead that was damaged and had exposed bare conductors.
Recent events (2)
- — I (S) $2837.5
- — Z (S) $5675
1910.252 B02 III
- Issued
- Mar 17, 2025
- Abate by
- Apr 4, 2025
- Penalty
- Initial $3,783 · Current $1,892 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not required to wear appropriate goggles to protect them from the rays when noncombustible or flameproof screens or shields were not used on all sides. On or about September 26, 2024, and at times prior thereto, in the welding area, employees were performing welding work activities in areas that did not have the screens or shields erected along all sides allowing the welding rays to be visible by employees in adjacent areas.
Recent events (2)
- — I (S) $1891.5
- — Z (S) $3783
More inspections at Fabrication Solutions, LLC
View Fabrication Solutions, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347795585.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.