Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BUILDING AND CARPENTRY COMPANY LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BUILDING AND CARPENTRY COMPANY LLC in 2610 41 STREET NW, WASHINGTON, DC 20016 (NAICS 238130). OSHA activity number 347806887.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Building and Carpentry Company LLC — free Get an email when a new federal OSHA severe-injury report for Building and Carpentry Company LLC is published. One employer, no account, unsubscribe in one click.
Site address
2610 41 STREET NW
City
WASHINGTON
State
DC
ZIP
20016
Mailing
14231 GEORGIA AVE APT 202, SILVER SPRING, MD 20906
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 10 1 instance 4 exposed
Issued
Mar 4, 2025
Penalty
Initial $5,462 · Current $5,462
29 CFR  1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents:  a) On or about October 9, 2024, at a worksite located at 2610 41st Street NW, top floor, employees engaged in framing were not wearing eye protection provided while operating pneumatic tools such as nail guns, exposing them to a struck-by hazard.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $5462

1926.501 B13

Serious Gravity 10 1 instance 4 exposed
Issued
Mar 4, 2025
Abate by
Mar 12, 2025
Penalty
Initial $5,462 · Current $5,462
29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a) On or about October 9, 2024, at a worksite located at 2610 41st Street NW, top floor, employees engaged in framing activities were walking the top plate or standing on the trusses, exposing them to an estimated 10-foot fall to the interior wooden deck or an estimated 27-foot fall to the exterior ground.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $5462

1926.503 B01

Serious Gravity 10 1 instance 4 exposed
Issued
Mar 4, 2025
Abate by
Mar 12, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.503(b)(1):The employer did not verify fall protection training by preparing a written certification record.  a) On or about October 9, 2024, at a worksite located at 2610 41st Street NW, top floor, the employer did not certify the fall protection training for employees who may be exposed to fall hazards 6 feet or greater while conducting framing work.  In accordance with 29 CFR 1903.19(d), abatement ce1tification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $0

View Building and Carpentry Company LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347806887.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.