OSHA Inspection: ARTIGA CONSTRUCTION COMPANY

Issued

Feb 14, 2025

Abate by

Mar 13, 2025

Penalty

Initial $4,965 · Current $4,965

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1):Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:   At the facility located at 210 Kelly Road in Buffalo, Missouri:  On or about October 7, 2024, employees in the shipping and painting area were exposed to a struck-by and caught-in-between hazard while working with, and near, vertically staged steel roof trusses posing the risk of toppling over when displaced.     AMONG OTHER METHODS, FEASIBLE AND ACCEPTABLE ABATEMENT METHODS TO CORRECT THIS HAZARD ARE:  i.	Evaluate and implement methods to ensure that vertically stored trusses are protected against accidental displacement.   ii.	Formalize and train employees on truss handling procedures that remove employees from the danger zone during truss handling operations.   iii.	Evaluate and implement suitable tools and materials that allow employees handle trusses from a distance outside of the struck-by danger zone.  The tools and materials may include, but are not limited to, wireless crane controls and tag lines.

Issued

Feb 14, 2025

Abate by

Mar 13, 2025

Penalty

Initial $3,547 · Current $3,547

General-duty citation text

29 CFR  1910.135(a)(1):The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects:  At the facility located at 210 Kelly Road, Buffalo, Missouri- On or about October 7,  2024, employees were exposed to overhead hazards when moving and stacking steel trusses and were not protected from impact by the use of hard hats.

Issued

Feb 14, 2025

Abate by

Mar 13, 2025

Penalty

Initial $4,965 · Current $4,965

General-duty citation text

29 CFR  1910.178(l)(6): The employer did not certify that each operator had been trained and evaluated as required by paragraph (l) through a certification that included the name of the operator, the date of the training, that date of evaluation, and the identity of the person(s) performing the training or evaluation:   At the facility located at 210 Kelly Road, Buffalo, Missouri- On or about October 7,  2024, employees were exposed to struck by hazards as well as crushing hazards. The employees were permitted to operate powered industrial trucks in which the employees have not successfully completed training and the employer failed to certify any training provided to the employees.

Issued

Feb 14, 2025

Abate by

Mar 13, 2025

Penalty

Initial $4,965 · Current $4,965

General-duty citation text

29 CFR  1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):  At the facility located at 210 Kelly Road, Buffalo, Missouri- On or about October 7,  2024, employees were exposed to struck by and crushing hazards while operating a Yale 1703 powered industrial truck in which the controls to operate the vehicle were not legible as to the control's functions.

Issued

Feb 14, 2025

Abate by

Mar 13, 2025

Penalty

Initial $4,965 · Current $4,965

General-duty citation text

29 CFR  1910.179(l)(3)(iii)(d): Pendant control stations were not kept clean and function labels were not kept legible:  At the facility located at 210 Kelly Road, Buffalo, Missouri- On or about October 7,  2024, employees were being exposed to overhead hazards as well as struck-by hazards while operating Macko Material Handing  C9511-1188 gantry crane. The pendant controls and the remote pedant controls were covered in paint and were illegible for employees to know what buttons control what actions.

Issued

Feb 14, 2025

Penalty

Initial $3,547 · Current $3,547

General-duty citation text

29 CFR  1904.39(a)(1): The employer did not report within 8-hours the death of an employee resulting from a work-related incident:   At the facility located at 210 Kelly Road, Buffalo, Missouri- On or about October 7,  2024, an employee was injured while working at a worksite located at 210 N. Kelly Road, Buffalo, Missouri. The employee died on October 8, 2024, due to injuries he sustained at the work location. The employer failed to report the incident to OSHA within 8 hours after the death of the employee.