Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WILLIAMS FABRICATION, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of WILLIAMS FABRICATION, INC. in 9335 SEAFOOD HOUSE ROAD, BAYOU LA BATRE, AL 36509 (NAICS 336611). OSHA activity number 347823544.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Williams Fabrication, INC. — free Get an email when a new federal OSHA severe-injury report for Williams Fabrication, INC. is published. One employer, no account, unsubscribe in one click.
Site address
9335 SEAFOOD HOUSE ROAD
City
BAYOU LA BATRE
State
AL
ZIP
36509
Mailing
9335 SEAFOOD HOUSE ROAD, BAYOU LA BATRE, AL 36509
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336611
Employees
10
Ownership type
A

4 citations on file for this inspection.

1910.134 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 13, 2025
Abate by
Mar 27, 2025
Penalty
Initial $2,128 · Current $1,277 Reduced
29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace and as referenced by the note contained in 29 CFR 1915.1026 (f)(2).  a) Welding area: On or about October 17, 2024, and at times prior thereto, the employer failed to provide employees with medical evaluation to determine the employee's ability to use a respirator, before the employees were required to use the respirators in the workplace.
Recent events (2)
  • — I (S) $1276.8
  • — Z (S) $2128

1915.1026 D01

Serious Gravity 1 1 instance 1 exposed
Issued
Mar 13, 2025
Abate by
Apr 10, 2025
Penalty
Initial $2,128 · Current $1,277 Reduced

Hazardous substances 0689

29 CFR  1915.1026(d)(1):The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI):  a) Welding area: Stainless steel welding: On or about October 22, 2024, and times prior thereto, the employer failed to determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI). An employee was exposed to hexavalent chromium at 3 micrograms per cubic meter which is approximately 1.2 times above the Action Level (AL) of 2.5 micrograms per cubic meter. Results were based on a 432-minute sampling period conducted. Exposure calculations included a zero increment for the 48-minute period not sampled.
Recent events (2)
  • — I (S) $1276.8
  • — Z (S) $2128

1915.152 B04

Other-than-serious 1 instance 3 exposed
Issued
Mar 13, 2025
Abate by
Apr 10, 2025
Penalty
Initial $0 · Current $0
29 CFR  1915.152(b)(4):The employer failed to document an occupational hazard assessment which should have included: Occupations involved in the survey, the date in which the survey took place and the name of the person who performed the hazard assessment.  a) Welding area: On or about October 17, 2024, and times prior thereto, the employer failed to document an occupational hazard assessment which should have included but not limited to these occupations; fitting, welding, and grinding; the date in which the hazard assessment was conducted and the name of the person who performed the hazard assessment.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1915.1026 J01

Other-than-serious 1 instance 1 exposed
Issued
Mar 13, 2025
Abate by
Apr 10, 2025
Penalty
Initial $0 · Current $0

Hazardous substances 0689

29 CFR  1915.1026(j)(1): 29 CFR 1915.1026: The employer did not ensure chromium (VI) was included in the program established to comply with the Hazard Communication Standard (HCS):   a) Welding area: On or about October 17, 2024, and at times prior thereto, the employer failed to include chromium (VI) in their hazard communication program.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Williams Fabrication, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347823544.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.