DEMOPOLIS, AL —
OSHA Inspection: DEMOPOLIS HICKORY MILL, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of DEMOPOLIS HICKORY MILL, INC. in 300 HICKORY MILL RD., DEMOPOLIS, AL 36732 (NAICS 321113). OSHA activity number 347828659.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DEMOPOLIS HICKORY MILL, INC.
- Site address
- 300 HICKORY MILL RD.
- City
- DEMOPOLIS
- State
- AL
- ZIP
- 36732
- Mailing
- PO BOX 236, DEMOPOLIS, AL 36732
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 8
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.95 G06
- Issued
- Jan 22, 2025
- Penalty
- Initial $0 · Current $0
8111
General-duty citation text
29 CFR 1910.95(g)(6):At least annually after obtaining the baseline audiogram, the employer did not obtain a new audiogram for each employee exposed at or above an 8-hour time-weighted average of 85 decibels : a) Lathe operator : On or about October 24, 2024, and at times prior to, the employer exposed employees to noise dose at levels of 78.4% (equivalent to an 8-hour time weighted average TWA of 88.2 dBA) which is 1.56 times the Action Level of 50% (equivalent to an 8-hour TWA of 85 dBA) while operating the Maschinenfabrik Zuckerman Weinn Lathe and unknown manufacturer for the Belt Sander. Results were calculated for a 237-minute sampling period. The employer failed to provide an annual audiometric test to the employee. b) Pop up saw operator : On or about October 24, 2024, and at times prior to, the employer exposed employees to noise dose at levels of 85.2% (equivalent to an 8-hour time weighted average TWA of 88.8 dBA) which is 1.7 times the Action Level of 50% (equivalent to an 8-hour TWA of 85 dBA) while operating an unknown manufacturer Pop-Up Saw. Results were calculated for a 440-minute sampling period. The employer failed to provide an annual audiometric test to the employee.
Recent events (1)
- — Z (O) $0
1910.95 L01
- Issued
- Jan 22, 2025
- Abate by
- Feb 12, 2025
- Penalty
- Initial $0 · Current $0
8111
General-duty citation text
29 CFR 1910.95(l)(1):The employer did not make available to affected employees or their representatives copies of 29 CFR 1910.95 and did not post a copy in the workplace: a) Lathe operator : On or about October 24, 2024, and at times prior to, the employer exposed employees to noise dose at levels of 78.4% (equivalent to an 8-hour time weighted average TWA of 88.2 dBA) which is 1.56 times the Action Level of 50% (equivalent to an 8-hour TWA of 85 dBA) while operating the Maschinenfabrik Zuckerman Weinn Lathe and unknown manufacturer for the Belt Sander. Results were calculated for a 237-minute sampling period. The employer failed to provide and post a copy of the standard to the employee. b) Rip saw, pop up saw and lathe operator : On or about October 24, 2024, and at times prior to, the employer exposed employees to noise dose at levels of 113.6% (equivalent to an 8-hour time weighted average TWA of 90.9 dBA) which is 2.27 times the Action Level of 50% (equivalent to an 8-hour TWA of 85 dBA) while operating the Maschinenfabrik Zuckerman Weinn Lathe, DIEHL Machine rip saw, and unknown manufacturer Pop-up saw. Results were calculated for a 447-minute sampling period. The employer failed to provide and post a copy of the standard to the employee. c) Pop up saw operator : On or about October 24, 2024, and at times prior to, the employer exposed employees to noise dose at levels of 85.2% (equivalent to an 8-hour time weighted average TWA of 88.8 dBA) which is 1.7 times the Action Level of 50% (equivalent to an 8-hour TWA of 85 dBA) while operating an unknown manufacturer Pop-Up Saw. Results were calculated for a 440-minute sampling period. The employer failed to provide and post a copy of the standard to the employee.
Recent events (1)
- — Z (O) $0
More inspections at Demopolis Hickory Mill, INC.
View Demopolis Hickory Mill, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347828659.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.