EL PASO, TX —
OSHA Inspection: M724 GRANITE LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of M724 GRANITE LLC in 7320 ALAMEDA, EL PASO, TX 79915 (NAICS 327991). OSHA activity number 347833063.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- M724 GRANITE LLC
- Site address
- 7320 ALAMEDA
- City
- EL PASO
- State
- TX
- ZIP
- 79915
- Mailing
- 7320 ALAMEDA, EL PASO, TX 79915
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 3
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.134 C01
- Issued
- Mar 5, 2025
- Abate by
- Mar 31, 2025
- Penalty
- Initial $4,965 · Current $2,500 Reduced
9000
General-duty citation text
29 CFR 1910.134(c)(1):A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use. On or about October 24, 2024, a written respiratory protection program was not established and implemented for employees who manufacture and install granite and quartz countertops.
Recent events (2)
- — I (S) $2500
- — Z (S) $4965
1910.1053 G01 I
- Issued
- Mar 5, 2025
- Abate by
- Mar 31, 2025
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.1053(g)(1)(i): Respiratory protection was not provided where exposures exceeded the PEL during periods necessary to install or implement feasible engineering and work practice controls: 915 On or about October 24, 2024, employees were not provided respirators when cutting, grinding, and or polishing countertops.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 I
- Issued
- Mar 5, 2025
- Penalty
- Initial $2,128 · Current $750 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l). On or about October 25, 2024, employees who operate a forklift were not certified as competent persons to safely operate the forklift.
Recent events (2)
- — I (S) $750
- — Z (S) $2128
1910.178 Q01
- Issued
- Mar 5, 2025
- Penalty
- Initial $3,547 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel. On or about October 25, 2024, a forklift with faulty brakes was operated by employees who move the large granite and quartz panels in and out of the shop.
Recent events (2)
- — I (S) $1750
- — Z (S) $3547
1910.178 Q07
- Issued
- Mar 5, 2025
- Abate by
- Mar 31, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: On or about October 25, 2024, a forklift used by employees was not inspected prior to its use or when placed in service.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.243 C01
- Issued
- Mar 5, 2025
- Abate by
- Mar 31, 2025
- Penalty
- Initial $4,256 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4)(a). On or about October 24, 2024, employees were using a 90-degree potable hand grinder with a 4? Gear Max Green Silicon Carbide Grinding Stone that was not guarded.
Recent events (2)
- — I (S) $2500
- — Z (S) $4256
1910.1053 D01
- Issued
- Mar 5, 2025
- Abate by
- Mar 31, 2025
- Penalty
- Initial $4,256 · Current $2,500 Reduced
9000
General-duty citation text
29 CFR 1910.1053(d)(1): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section. On or about October 24, 2024, employees who work in manufacturing and installing granite counter tops and expected to be exposed to silica were not assessed for over exposure to silica.
Recent events (2)
- — I (S) $2500
- — Z (S) $4256
More inspections in this industry (NAICS 327991)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347833063.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.