HANOVER, PA —
OSHA Inspection: SUSQUOD, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SUSQUOD, INC. in 60 FILBERT STREET, HANOVER, PA 17331 (NAICS 238290). OSHA activity number 347846982.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUSQUOD, INC.
- Site address
- 60 FILBERT STREET
- City
- HANOVER
- State
- PA
- ZIP
- 17331
- Mailing
- 319 MAPLE AVENUE, HANOVER, PA 17331
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238290
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.146 C01
- Issued
- Feb 26, 2025
- Abate by
- Jul 1, 2025
- Penalty
- Initial $4,256 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces. a) 319 A Maple Avenue HANOVER, PA 17331 - employees were exposed to confined space hazards due to employees having to maneuver over, around, and under structures for egress in a space containing hydraulic and electrical energy sources, while preforming repairs under a dock leveler, on or about October 29, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $4000
- — Z (S) $4256
1910.146 C09
- Issued
- Feb 26, 2025
- Abate by
- Mar 24, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(c)(9): In addition to complying with the permit space requirements that apply to all employers, each contractor who is retained to perform permit space entry operations did not comply with the requirements of 29 CFR 1910.146(c)(9)(i)-(iii): a) 319 A Maple Avenue HANOVER, PA 17331 - employees were exposed to confined space hazards due to the employer not obtaining any available information regarding permit space hazards and entry operations from the host employer, while preforming repairs under a dock leveler, on or about October 29, 2024. b) 319 A Maple Avenue HANOVER, PA 17331 - employees were exposed to confined space hazards due to the employer not Coordinate entry operations with the host employer, while preforming repairs under a dock leveler, on or about October 29, 2024. c) 319 A Maple Avenue HANOVER, PA 17331 - employees were exposed to confined space hazards due to the employer not Inform the host employer of the permit space program that the contractor will follow and of any hazards confronted or created in permit spaces, while preforming repairs under a dock leveler, on or about October 29, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C01
- Issued
- Feb 26, 2025
- Abate by
- Jul 1, 2025
- Penalty
- Initial $2,837 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. a) 319 A Maple Avenue HANOVER, PA 17331 - Employees were working on hazardous energy sources without utilizing an energy control program consisting of energy control procedures, employee training, and periodic inspections, on or about October 29, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (S) $2837
1910.132 D02
- Issued
- Feb 26, 2025
- Abate by
- Mar 18, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed. a) 319 A Maple Avenue HANOVER, PA 17331 - employees are exposed to workplace hazards due to the employer not completing and certifying a workplace hazard assessment, employees were working on hydraulic components without safety glasses and under overhead hazards, dock plates without head protection, on or about October 29, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.132 F01
- Issued
- Feb 26, 2025
- Abate by
- Jul 1, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment. (a) 319 A Maple Avenue HANOVER, PA 17331 - employees are exposed to workplace hazards due to the employer not training employees on the selection and utilization of personal protective equipment while working on hydraulic and electrical components and under overhead hazards, on or about October 29, 2024. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Susquod, INC.
View Susquod, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238290)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347846982.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.