MIDLOTHIAN, TX ·
OSHA Inspection: TEXAN FRAMER, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TEXAN FRAMER, LLC in 162 BULLEYE, MIDLOTHIAN, TX 76065 (NAICS 238130). OSHA activity number 347848988.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TEXAN FRAMER, LLC
- Site address
- 162 BULLEYE
- City
- MIDLOTHIAN
- State
- TX
- ZIP
- 76065
- Mailing
- P.O. BOX 51494, DENTON, TX 76206
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Nov 26, 2024
- Abate by
- Dec 6, 2024
- Penalty
- Initial $2,765 · Current $1,659 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: On or about October 1, 2024, at 1624 Bullseye Road in Mansfield, Texas, employees worked below employees performing framing work without wearing hardhats.
Recent events (2)
- · I (S) $1659
- · Z (S) $2765
1926.102 A01
- Issued
- Nov 26, 2024
- Abate by
- Dec 6, 2024
- Penalty
- Initial $2,765 · Current $1,659 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: On or about October 1, 2024, at 1624 Bullseye Road in Mansfield, Texas, employees used Hitachi nail guns to perform framing work without eye and face protection.
Recent events (2)
- · I (S) $1659
- · Z (S) $2765
1926.501 B13
- Issued
- Nov 26, 2024
- Abate by
- Dec 6, 2024
- Penalty
- Initial $4,839 · Current $2,903 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest system: On or about October 1, 2024, at 1624 Bullseye Road in Mansfield, Texas, where employees performing framing worked from a height of more than 6-feet above the ground.
Recent events (2)
- · I (S) $2903.4
- · Z (S) $4839
1926.1051 A
- Issued
- Nov 26, 2024
- Abate by
- Dec 6, 2024
- Penalty
- Initial $2,765 · Current $1,659 Reduced
General-duty citation text
29 CFR 1926.1051(a): Stairway(s) or ladder(s) were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, or no ramp, runway, sloped embankment, or personnel hoist was provided: On or about October 1, 2024, at 1624 Bullseye Road in Mansfield, Texas, the employer did not provide an extension ladder for employees to safely access and egress the upper levels of the residential structure, exposing employees to a fall hazard.
Recent events (2)
- · I (S) $1659
- · Z (S) $2765
1926.503 A01
- Issued
- Nov 26, 2024
- Abate by
- Dec 6, 2024
- Penalty
- Initial $388 · Current $233 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: On or about October 1, 2024, at 1624 Bullseye Road in Mansfield, Texas, employees who performed framing work from heights of more than 6-feet above the ground were not provided a fall protection training program with hazard recognition and avoidance training.
Recent events (2)
- · I (O) $232.8
- · Z (O) $388
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 347848988.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.