Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PROMINENT MASONRY LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of PROMINENT MASONRY LLC in 3505 LAKE BUTTE DES MORTS DRIVE, OSHKOSH, WI 54904 (NAICS 238140). OSHA activity number 347859340.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Prominent Masonry LLC — free Get an email when a new federal OSHA severe-injury report for Prominent Masonry LLC is published. One employer, no account, unsubscribe in one click.
Site address
3505 LAKE BUTTE DES MORTS DRIVE
City
OSHKOSH
State
WI
ZIP
54904
Mailing
11039 NORTH LA HOMA ROAD, MISSION, TX 78574
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
8
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Jan 27, 2025
Abate by
Feb 25, 2025
Penalty
Initial $398 · Current $398
29 CFR  1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.  The employer failed to provide certification of abatement for the citation related to not establishing and implementing a written silica exposure control plan, that was issued on November 10, 2024.
Recent events (1)
  • — Z (O) $398

1926.1153 C01

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 20, 2024
Penalty
Initial $2,074 · Current $2,074

Hazardous substances 9000

29 CFR  1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  a) On or about November 1, 2024, at the worksite located at 3505 Lake Butte Des Morts Drive, Oshkosh, Wisconsin; the employer did not ensure that an employee cutting a brick containing crystalline silica with a handheld power saw had fully and properly implemented the engineering controls and work practices specified on Table 1, exposing an employee to the hazards associated with respirable crystalline silica.
Recent events (1)
  • — Z (S) $2074

1926.1153 D02 I

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 20, 2024
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1926.1153(d)(2)(i): The employer shall assess the exposure of each employee who is or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section.  a) On or about November 1, 2024, at the worksite located at 3505 Lake Butte Des Morts Drive, Oshkosh, Wisconsin; the employer did not assess the exposure of an  employee who is or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level, exposing an employee to the hazards associated with respirable crystalline silica.
Recent events (1)
  • — Z (S) $0

1926.1153 G01

Serious Gravity 1 1 instance 2 exposed
Issued
Nov 20, 2024
Abate by
Dec 19, 2024
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1926.1153(g)(1): The employer shall establish and implement a written exposure control plan that contains at least the following elements: (i) A description of the tasks in the workplace that involve exposure to respirable crystalline silica; (ii) A description of the engineering controls, work practices, and respiratory protection used to limit employee exposure to respirable crystalline silica for each task; (iii) A description of the housekeeping measures used to limit employee exposure to respirable crystalline silica; and (iv) A description of the procedures used to restrict access to work areas, when necessary, to minimize the number of employees exposed to respirable crystalline silica and their level of exposure, including exposures generated by other employers or sole proprietors.  a) On or about November 1, 2024, at the worksite located at 3505 Lake Butte Des Morts Drive, Oshkosh, Wisconsin; the employer did not establish and implement a written silica exposure control plan for when employees cut bricks containing crystalline silica with a handheld power saw and stationary masonry saw, exposing employees to the hazards associated with respirable crystalline silica.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347859340.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.