ENDICOTT, NY —
OSHA Inspection: NATIONAL PIPE AND PLASTICS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of NATIONAL PIPE AND PLASTICS, INC. in 15 MILLS AVENUE, ENDICOTT, NY 13760 (NAICS 326122). OSHA activity number 347860983.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NATIONAL PIPE AND PLASTICS, INC.
- Site address
- 15 MILLS AVENUE
- City
- ENDICOTT
- State
- NY
- ZIP
- 13760
- Mailing
- 15 MILLS AVENUE, ENDICOTT, NY 13760
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326122
- Employees
- 213
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.132 D01 I
- Issued
- Feb 14, 2025
- Abate by
- Mar 13, 2025
- Penalty
- Initial $9,457 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(d)(1)(i): When the employer had assessed the workplace hazard(s) and determined that hazard(s) were present, the employer did not select and/or use the types of personal protective equipment that would protect the affected employee from the hazards. a) National Pipe and Plastics Inc., 15 Mills Avenue, Endicott, NY 13760, on or about 11/3/2024: The employer assessed the workplace hazards and determined that hazards were present, however the employer did not select what personal protective equipment was necessary. Abatement certification is required.
Recent events (3)
- — F (S) $0
- — C (S) $9457
- — Z (S) $9457
1910.147 C04 I
- Issued
- Feb 14, 2025
- Abate by
- Mar 13, 2025
- Penalty
- Initial $14,187 · Current $11,250 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Line 2, National Pipe and Plastics Inc., 15 Mills Avenue, Endicott, NY 13760, on or about 11/3/2024; Lockout/tagout energy control procedures were not utilized by employees who performed servicing and maintenance tasks including, but not limited to, repairing/replacing the travel screw on the Line 2 Vacuum Tank. Abatement certification must be submitted.
Recent events (3)
- — F (S) $11250
- — C (S) $14187
- — Z (S) $14187
1910.147 C07 I A
- Issued
- Feb 14, 2025
- Abate by
- Mar 13, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. a) National Pipe and Plastics Inc., 15 Mills Avenue, Endicott, NY 13760, on or about 11/3/2024; Employees did not receive training in alternate means and methods of energy isolation if the LOTO would interfere with their servicing tasks. Abatement certification is required.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Feb 14, 2025
- Penalty
- Initial $16,550 · Current $13,125 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Line 2A, National Pipe and Plastics Inc., 15 Mills Avenue, Endicott, NY 13760, on or about 11/3/2024: Employees were working within inches of the travel screw (rotating threaded rod) on Line 2A. The employer did not ensure that machine guarding was provided to protect employees from the hazards created by rotating parts.
Recent events (3)
- — F (O) $13125
- — C (S) $16550
- — Z (S) $16550
1910.1030 G02 II A
- Issued
- Feb 14, 2025
- Abate by
- Mar 13, 2025
- Penalty
- Initial $7,093 · Current $5,625 Reduced
General-duty citation text
29 CFR 1910.1030(g)(2)(ii)(A): The employer did not ensure that training was provided to employees with occupational exposure at the time of initial assignment to tasks where occupational exposure might take place: a) Line 2, National Pipe and Plastics Inc., 15 Mills Avenue, Endicott, NY 13760, on or about 11/3/2024: Lead Employees and Supervisors were required to be part of the first response team at the facility, where occupational exposure events might take place, and the employer did not provide training at the time of initial assignment. Abatement certification is required.
Recent events (3)
- — F (O) $5625
- — C (S) $7093
- — Z (S) $7093
More inspections at National Pipe and Plastics, INC.
View National Pipe and Plastics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326122)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347860983.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.