SALINEVILLE, OH —
OSHA Inspection: CREEKSIDE SPRINGS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CREEKSIDE SPRINGS, LLC in 32 WASHINGTON STREET, SALINEVILLE, OH 43945 (NAICS 561910). OSHA activity number 347862518.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Creekside Springs, LLC — free
Get an email when a new federal OSHA severe-injury report for Creekside Springs, LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- CREEKSIDE SPRINGS, LLC
- Site address
- 32 WASHINGTON STREET
- City
- SALINEVILLE
- State
- OH
- ZIP
- 43945
- Mailing
- 667 MERCHANT ST, AMBRIDGE, PA 15003
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561910
- Employees
- 50
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.22 C
- Issued
- Feb 10, 2025
- Abate by
- Feb 28, 2025
- Penalty
- Initial $9,931 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(c): The employer did not provide, and ensure each employee uses, a safe means of access and egress to and from walking-working surfaces: On or about November 11, 2024, the employer failed to ensure that employees had a safe means of access at the box erector machine when they had to step over the conveyor to get from side to side. The conveyor was laying on a metal grate single step which did have rails, but the conveyor was on top of the grate and presented a tripping hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $9931
1910.22 D01
- Issued
- Feb 10, 2025
- Abate by
- Feb 28, 2025
- Penalty
- Initial $6,620 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition: On or about November 11, 2024, the employer failed to ensure that the walking and working surfaces of the plant floor located by the box erector machine line was keep free of hazards. The surrounding floor had large amounts of water pooling around the area where the employees are walking and working presenting a slip hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $6620
1910.178 L02 II
- Issued
- Feb 10, 2025
- Abate by
- Mar 17, 2025
- Penalty
- Initial $11,585 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace: On or about November 11, 2024, the employer failed to ensure that employees who operate a powered industrial vehicle were trained in the hands on operation of the vehicle as well as evaluated on their operational skill to ensure they were able to safely operate the vehicle.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1910.212 A01
- Issued
- Feb 10, 2025
- Abate by
- Feb 28, 2025
- Penalty
- Initial $11,585 · Current $11,580 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about November 11, 2024, the employer failed to ensure that the rear panel on the box erector machine was in place during operation. Employees were exposed to the moving parts of the machine with an employee sustaining a serious injury (hand crush).
Recent events (2)
- — I (S) $11580
- — Z (S) $11585
1910.303 B01 I
- Issued
- Feb 10, 2025
- Abate by
- Feb 28, 2025
- Penalty
- Initial $11,585 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(i): Electrical equipment was not free from recognized hazards likely to cause death or serious physical harm, in that the employer did not ensure that the electrical equipment had listing or labeling identifying the purpose: On or about November 11, 2024, the employer failed to ensure that the electrical panel box located at the end of the box erector line and just above the conveyor system that travels below it was identified and labeled.
Recent events (2)
- — I (O) $0
- — Z (S) $11585
1910.303 G01 I C
- Issued
- Feb 10, 2025
- Abate by
- Feb 28, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i)(C): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the width of work space was not clear and did not extend from the grade, floor, or platform to the height required by paragraph: On or about November 11, 2024, the employer failed to ensure that the electrical panel box located at the end of the box erector line and just above the conveyor system that travels below it had free and clear access to the box.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 C03 I
- Issued
- Feb 10, 2025
- Abate by
- Feb 28, 2025
- Penalty
- Initial $4,965 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(c)(3)(i): Conductors were not spliced or joined with splicing devices identified for the use or by brazing, welding, or soldering with a fusible metal or alloy. Soldered splices were not first spliced or joined to be mechanically and electrically secure without solder and then soldered. All splices and joints and the free ends of conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose: On or about November 11, 2024, the employer failed to ensure that sensor wire (yellow) at the rear of the box erector machine line was appropriately spliced, connected and insulated to prevent accident exposure and electrical shock to employees who are working in and around the area.
Recent events (2)
- — I (S) $0
- — Z (S) $4965
1904.33 A
- Issued
- Feb 10, 2025
- Abate by
- Mar 17, 2025
- Penalty
- Initial $1,655 · Current $0 Reduced
General-duty citation text
29 CFR 1904.33(a): At this establishment, the employer did not retain (save) the OSHA 300 Log, the privacy case list (if one exists), the annual summary, and the OSHA 301 Incident Report forms for five (5) years following the end of the calendar year that these records covered: On or about November 11, 2024, the employer failed to establish and maintain the OSHA 300 and 300A logs for the CY of 2020-2024. The last recordable injury occurred on 7-30-24 where an employee sustained a serious crush injury to the hand when her hand came into contact with moving parts of the box erector line.
Recent events (2)
- — I (O) $0
- — Z (O) $1655
More inspections at Creekside Springs, LLC
View Creekside Springs, LLC's full OSHA safety record →
More inspections in this industry (NAICS 561910)
Jul 16, 2026
UPS · LOCKPORT, IL
Jul 10, 2026
Mauser Packaging Solutions Holding Company · LEOMINSTER, MA
Jun 23, 2026
Capstone Logistics · WESTBROOK, ME
Jun 19, 2026
Advanced Logistics & Fulfillments · KANSAS CITY, MO
Jun 12, 2026
HNV Holding LLC · CHATSWORTH, CA
More inspections in OH
Jul 17, 2026
Teknol, INC. · DAYTON, OH
Jul 16, 2026
Lippert · PAYNE, OH
Jul 16, 2026
Provia · SUGARCREEK, OH
Jul 16, 2026
Greenacres Foundation · CINCINNATI, OH
Jul 16, 2026
Whirlaway Corporation · WELLINGTON, OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347862518.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.